Bosch DHI755F Installation Manual download pdf (Page 27)

Fitting into wall cupboard

Note: The extractor hood housing can be

clad inside the wall cupboard (e.g. with

chipboard).

If so, observe the following:

❑

The intermediate base must not be

placed on the extractor hood housing.

❑

Never attach cladding to the housing.

❑

Provide access for customer service.

❑

If the extractor hood is to be installed

further back in the cupboard, the stops

for the ﬁlter drawer can be moved

forwards.

❑

To do this, undo the screws, move the

stops and retighten the screws.

2. Align handle moulding and screw to the

appliance.

Exhaust air Circulating air

13,5 14,0

We reserve the right to construction changes within the

context of technical development.

Weight in kg:

Attaching the handle moulding:

A handle moulding must be attached to

the ﬁlter drawer.

This handle moulding may be a wooden

strip which matches the kitchen units or a

handle moulding available as an optional

accessory (see optional accessories on the

back page).

1. Using the enclosed template

III , mark

the attachment points on the wooden

strip and make holes with a bradawl.

When you drill:

2 mm dia – max. 10 mm in depth.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 95 96

No comments

Bosch DHI755F Installation Manual Page 27