Bosch DIG098G50I Instruction Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
Operating the appliance en
7
1Operating the appliance
Oper at i ng the appl i ance
These instructions apply to several appliance variants.
It is possible that individual features are described
which do not apply to your appliance.
Note: Switch on the extractor hood when you start
cooking and switch it off again several minutes after you
have finished cooking. This is the most effective way of
removing the kitchen fumes.
Control panel
Switching the appliance on and off
Switching on the appliance
Press button 1.
The extractor hood starts at fan setting 1.
Selecting the fan setting
Press the 2y or 3= button to set the corresponding fan
setting.
Switching off the appliance
Press the # button.
Intensive setting
You can use the intensive setting if there is a large
build-up of odours and fumes/vapours.
1. To activate intensive mode, press and hold the
3= button for 2 seconds.
To confirm the setting, the # button lights up and
the 3= button flashes.
2. To end intensive mode early, press the # button.
Note: Intensive mode runs for 10 minutes. Once this
time has elapsed, the appliance switches back to the
fan setting that was last selected.
Run-on function
The run-on function allows the extractor hood to
continue running for a few minutes after it has been
switched off. This eliminates any remaining cooking
smells. The extractor hood will then switch itself off
automatically.
Switching on
1. Press and hold the 2y button.
2. Press the button for the required fan setting 1, 2y
or 3=.
The D button and the button for this fan setting
flash.
Notes
The run-on time for all fan settings is 30 minutes.
Once this time has elapsed, the ventilation system
switches off automatically.
The fan setting can be changed during the run-on
time by pressing and holding the required power
level.
Switching off
Press and hold the 2y button.
The fan run-on will end before the remaining run-on time
has elapsed.
Lighting
The lighting can be switched on and off independently
of the ventilation system.
Switching on or off
Press the B button.
Explanation
D Switches off the fan
1 Fan setting 1
2y Fan setting 2/Run-on function
3= Fan setting 3/intensive mode
B Switches the lighting on/off
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments