Bosch DWT073650 Installation Manual download pdf (Page 32)

4. Place ue ducts on the extractor hood, push

the inner ue duct upwards and attach the

left and right sides to the xing bracket.

5. Screw the inner ue duct with 2 screws to

the sides of the xing bracket.

Installing the ue ducts

 RISK OF INJURY

The insides of the ue ducts may have sharp

edges. We recommend wearing protective

gloves during installation.

1. Separate the ue ducts. To do this, remove

the adhesive tape.

2. Remove the protective lm from both ue

ducts.

3. Insert one ue duct into the other.

NOTE: Avoid scratching the ue ducts when

inserting them, e.g. by placing the installation

template as protection over the edge of the outer

ue duct.

 Note the position of the slots in the ue

duct!

– Exhaust-air mode: Slots of the inner ue

duct downwards.

– Circulating-air mode: Slots of the inner ue

duct upwards.

Installation

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 107 108

No comments

Bosch DWT073650 Installation Manual Page 32