Bosch GSR 10,8-2-LI Specifications download pdf (Page 15)

English | 15

Bosch Power Tools 2 609 140 658 | (27.7.11)

If the gear selector 3 cannot be pushed through to the stop,

lightly turn the drill chuck with drill.

Switching On and Off

To start the machine, press the On/Off switch 7 and keep it

pressed.

The power light 9 lights up when the On/Off switch 7 is slightly

or completely pressed, and allows the work area to be illumi-

nated when lighting conditions are insufficient.

To switch off the machine, release the On/Off switch 7.

Adjusting the Speed

The speed of the switched on power tool can be variably ad-

justed, depending on how far the On/Off switch 7 is pressed.

Light pressure on the On/Off switch 7 results in a low rotation-

al speed. Further pressure on the switch results in an increase

in speed.

Fully automatic spindle locking (Auto-lock)

When the On/Off switch 7 is not pressed, the drill spindle and

thus the tool holder are locked.

This enables screws to be screwed in, even when the battery

is empty and allows for the machine to be used as a screwdriv-

er.

Run-on Brake

When the On/Off switch 7 is released, the chuck brakes to a

stop, thus preventing the run-on of the tool.

When driving in screws, wait until the screw is screwed in

flush with the material and then release the On/Off switch 7.

By doing so, the head of the screw does not penetrate into the

material.

Battery Charge-control Indication

The battery charge-control indicator 8 consists of three green

LEDs, and indicates the charge condition of the battery for a

few seconds when the On/Off switch 7 is pressed halfway or

fully.

Temperature Dependent Overload Protection

When using as intended for, the power tool cannot be subject

to overload. When the load is too high or the allowable battery

temperature range of 0–70 °C is exceeded, the speed is re-

duced. The power tool will not run at full speed until reaching

the allowable battery temperature.

Working Advice

f Apply the power tool to the screw only when it is

switched off. Rotating tool inserts can slip off.

After longer periods of working at low speed, allow the ma-

chine to cool down by running it for approx. 3 minutes at max-

imum speed with no load.

For drilling in metal, use only perfectly sharpened HSS drill

bits (HSS=high-speed steel). The appropriate quality is guar-

anteed by the Bosch accessories program.

Before screwing larger, longer screws into hard materials, it is

advisable to predrill a pilot hole with the core diameter of the

thread to approx.

of the screw length.

Maintenance and Service

Maintenance and Cleaning

f Before any work on the machine itself (e. g. mainte-

nance, tool change, etc.) as well as during transport

and storage, remove the battery from the power tool.

There is danger of injury when unintentionally actuating

the On/Off switch.

f For safe and proper working, always keep the machine

and ventilation slots clean.

When the battery is no longer operative, please refer to an au-

thorised after-sales service agent for Bosch power tools.

If the machine should fail despite the care taken in manufac-

turing and testing procedures, repair should be carried out by

an after-sales service centre for Bosch power tools.

In all correspondence and spare parts order, please always in-

clude the 10-digit article number given on the type plate of

the machine.

After-sales Service and Customer Assistance

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Our customer service representatives can answer your ques-

tions concerning possible applications and adjustment of

products and accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

Tel. Service: +44 (0844) 736 0109

Fax: +44 (0844) 736 0146

E-Mail: boschse[email protected]

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: +353 (01) 4 66 67 00

Fax: +353 (01) 4 66 68 88

LED Capacity

Continuous lighting 3 x green ≥ 2/3

Continuous lighting 2 x green ≥ 1/3

Continuous lighting 1 x green < 1/3

Flashing light 1 x green Reserve

OBJ_BUCH-970-003.book Page 15 Wednesday, July 27, 2011 3:35 PM

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 159 160

Bosch GSR 10,8-2-LI Specifications Page 15

Comments to this Manuals

Bosch GSR 10,8-2-LI Specifications Page 15

Comments to this Manuals

Related products and manuals for Cordless combi drills Bosch GSR 10,8-2-LI