Bosch SGE63E06UC User Manual download pdf (Page 7)



Water softening system

Your dishwasher requires soft water to ensure proper washing results and

is equipped with an internal water softening system. However, if you have

a household water softening system, you will not need to use the internal

system provided.

The amount of salt required depends on the degree of hardness of your tap

water (see table at right for more information).

For the water softening system to function properly, it will need to use

dishwasher water softener salt. The amount of salt dispensed can be set from

“H:00” to “H:07”. Salt is not required at H:00 (this is the default factory

setting - see table at right).

• Open the door (for hidden controls only).

• Turn the unit on using the [

ON/OFF] button .

• Hold down the “A” button (see page 4) and press [START] until the

display indicates “H:00”.

• Release both buttons.

• Press the “C” button to select the desired setting.

• Save the selected setting by pressing [START].

• Close the door (for hidden controls only).

NOTE: For information on how to use the water hardness test strip, provided in

the detergent sample kit, please see below.

Dishwasher setup

tap set value use

water hardness at

ppm CaCO³/l dishwasher salt

0 - 110 H:00 no

120 - 140 H:01 yes

150 - 180 H:02 yes

190 - 210 H:03 yes

220 - 290 H:04 yes

300 - 370 H:05 yes

380 - 540 H:06 yes

550 - 890 H:07 yes

Default setting from factory is H:00

Using a water hardness test strip

  

  

  

  

  



































Dip the test strip briey into tap water for a second.

Shake o excess water and compare after approxi-

mately 1 minute.

Setting of

water softener

H:00

H:02

H:04

H:06

After 1 minute the red

discoloration of the test

areas will show you the

correct setting.

1 2 3 4 5 6 7 8 9 10 11 12 ... 49 50

Comments to this Manuals

No comments

Bosch SGE63E06UC User Manual Page 7

Comments to this Manuals

Related products and manuals for Dishwashers Bosch SGE63E06UC