Bosch SME88TD01E Instruction Manual download pdf (Page 53)

Installation and connection en

53

Transporting

Empty the dishwasher and secure loose

parts.

Drain the appliance according

to the following steps:

1. Turn on the tap.

2. Open the door.

3. Switch on ON/OFF switch (.

4. Select programme with the highest

temperature.

The estimated programme duration

is indicated on the display window at

the top @.

5. Press START button )".

6. Close the door.

Programme sequence starts.

7. Open the door after

approx. 4 minutes.

8. Press START button )" until

“Program was terminated”/“Ready in

one minute.” is indicated at the top

of the display window @.

9. Close the door.

10. Open the door after approx. 1

minute.

The display window at the top @

indicates; “Finished”.

11. Switch off ON/OFF switch (.

12. Turn off the tap, disconnect supply

hose and drain water.

Note: Transport appliance upright only.

This prevents residual water from

running into the machine control

and damaging the programme

sequence.

Protection against frost

Protection against frost (Emptying the appliance)

If the appliance is in a room where there

is a risk of frost (e.g. holiday home),

empty the appliance completely (see

Transportation).

6XEMHFWWRFKDQJHV

1 2 ... 48 49 50 51 52 53 54 55 56

Comments to this Manuals

No comments