Bosch UFLED Installation Manual download pdf (Page 16)

16 en | Installation AEGIS UFLED

F.01U.123.987 | 1.0 | 2010.04 Installation Manual Bosch Security Systems

1. Attach the illuminator to a pan and tilt unit, wall bracket or

camera housing as required.

2. Connect the illuminator to a 12–24 VDC or to a 24 VAC

(±15%, 50/60 Hz) power supply.

3. Commission the mains supply, camera, and monitoring

control equipment.

4. Adjust the pan of the illuminator to match the camera’s

field of view.

5. Loosen the bolts on each side of the unit and adjust the

vertical alignment to maximize the results; re-tighten the

bolts.

6. Tilt the unit downwards until the near part of required field

of view is saturated with light as viewed on the monitor.

7. Slowly tilt the unit upwards until the furthest part of the

required field of view is illuminated correctly on the

monitor.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

No comments

Bosch UFLED Installation Manual Page 16