Bosch Art Easytrim Accu Instruction Manual download pdf (Page 7)

English - 3

1 On/Off switch

2 Handle

3 Guide handle

4 Shaft, upper

5 Shaft, lower

6 Trimmer head

7 Ventilation slots

8 Cutting guard

9 Rechargeable battery

10 Battery charger

11 Charging compartment

12 LED indicator

13 Mains plug**

14 Serial Number

**Country specific

Not all of the accessories illustrated or described are

included as standard delivery.

Charging Procedure

The charging procedure starts as soon as the mains

plug is plugged into the socket and the battery 9 is

inserted into the charging compartment 11.

The green LED 12 is not a charge control indica-

tor! When the green LED is lit, it indicates that a

charging current flows.

After the end of the charging process (approx.

3 h–4 h), pull the mains plug of the battery charger

from the socket and remove the battery.

The battery should not be charged for longer

than 5.5 hours.

A temperature increase of the battery indicates that

it is fully charged.

Charging Advice

With continuous or several repetitive charging cy-

cles without interruption, the charger can warm up.

This is not harmful and does not indicate a technical

defect of the unit.

A battery 9 that is new or has not been used for a

longer period does not develop its full capacity until

after approximately 5 charging/discharging cycles.

Leave such batteries 9 in the charging compart-

ment 11 until they have clearly warmed up.

A significantly reduced working period after charging

indicates that the batteries are worn out and must be

replaced.

Do not connect the battery before product

is completely assembled.

Ensure product is assemble in the following or-

der:

Assemble trimmer shaft

Push the upper shaft 4 and lower shaft 5 together

until a click can be heard.

Note: Once the upper and lower shaft is assembled

it can not be disassembled.

Ensure internal cable is not trapped or twisted.

Mounting the Cutting Guard

Place the cutting guard 8 on the trimmer head 6.

➊ Hook the guard onto trimmer head and push until

secure fitting.

➋ Push rear of guard until secure (click).

Fitting Cutting Disc/Fitting Blade

Press cutting disc 15 onto drive adaptor as shown

(click).

Fit the blade, place the blade 16 over the pivot 17

and pull outwards until it snaps into place.

Operating Controls

For Your Safety

Warning! Switch off, remove battery from ma-

chine before adjusting or cleaning.

The blade continues to rotate for a few sec-

onds after the trimmer is switched off.

Caution – do not touch rotating blade.

Assembly

F016 L70 456.book Seite 3 Dienstag, 20. Januar 2009 9:35 09

14 • F 016 L70 456 • TMS • 11.11.08

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Bosch Art Easytrim Accu Instruction Manual Page 7

Comments to this Manuals

Related products and manuals for Grass trimmers Bosch Art Easytrim Accu