Bosch MUMVC00VCN Instruction Manual download pdf (Page 20)

20

en Cleaning and servicing

Cleaning and servicing

Attention!

Do not use abrasive cleaning agents.

Surfaces may be damaged.

Cleaning the base unit

W Danger of electric shock!

Never immerse the base unit in water or

place under running water. Do not use a

steam cleaner.

■ Remove mains plug.

■ Wipe the base unit and drive cover with

a damp cloth. If required, use a little

detergent.

■ Then dry the base unit.

Cleaning the bowl and tools

The bowl and tools are dishwasher-proof.

Do not wedge plastic parts in the dish-

washer, as they could be permanently

deformed during the washing process!

Cleaning the continuous-feed

shredder

All parts of the continuous-feed shredder

are dishwasher-proof.

Tip: To remove the red lm after processing

e.g. carrots, pour a little cooking oil on

a cloth and rub the lm off the continu-

ous-feed shredder (not the cutting discs).

Then rinse the continuous-feed shredder.

Cleaning the blender

W Risk of injury from sharp blades!

Do not touch blender blades with bare

hands.

The blender jug, lid and funnel are

dishwasher-proof.

Tip: After processing liquids, it is often suf-

cient to clean the blender without removing

it from the appliance. Pour a little water and

washing-up liquid into the attached blender.

Switch on the blender for several seconds

(setting M). Pour out the water and rinse out

the blender with clear water.

Important information

If required, clean accessories bag. Follow

care instructions in the bag.

Storage

W Risk of injury!

When the appliance is not in use, pull out

the mains plug.

Fig. K:

■ Store tools and cutting discs in the

accessories bag.

■ Keep accessories bag in the bowl.

■ To store in the original packaging, see

Fig. L.

Troubleshooting

W Risk of injury!

Before eliminating a fault, pull out the mains

plug.

Important information

The Operating indicator ashes if the appli-

ance has been operated incorrectly or the

electronic fuse has tripped or the appliance

is defective.

The swivel arm must be engaged in

every operating position.

Initially try to eliminate the problem which

has occurred with the help of the following

information.

Fault

Appliance does not start.

Remedial action

■ Check the power supply.

■ Check the mains plug.

■ Check swivel arm. Correct position?

Engaged?

■ Screw on blender or bowl as far as

possible.

■ Attach the blender cover and screw on as

far as possible.

■ Attach drive cover to unused drives.

■ The safety lock is active. Switch appli-

ance to 0 and then back to the required

setting.

Fault

Appliance switches off during use. The

overload protection feature has been

activated. Too much food was processed at

one time.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 32 33

Comments to this Manuals

No comments