Bosch DLE 40 Professional Operations Instructions Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 18
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
English | 19
Bosch Power Tools 1 609 929 R53 | (23.7.08)
Technical Data
Digital Laser Rangefinder DLE 70
Professional
Article number
3 601 K16 60.
Measuring range
0.0570 m
A)
Measuring accuracy (typically) ± 1.5 mm
B)
Lowest indication unit 1mm
Operating temperature
10 °C...+50 °C
C)
Storage temperature 20 °C...+70 °C
Relative air humidity, max.
90 %
Laser class
2
Laser type
635 nm, <1 mW
Laser beam diameter (at 25 °C) approx.
– at 10 m distance
– at 70 m distance
6mm
42 mm
Batteries
Rechargeable batteries
4x1.5VLR03(AAA)
4x1.2VKR03(AAA)
Battery live, approximately
– Individual measurements
– Continuous measurement
30000
D)
5h
D)
Automatic switch-off after approx.
–Laser
– Measuring tool (without measurement)
20 s
5min
Weight according to EPTA-Procedure 01/2003
0.18 kg
Dimensions
59 x 100 x 32 mm
Degree of protection (excluding battery compartment)
IP 54 (dust and splash water protected)
A) The working range increases depending on how well the laser light is reflected from the surface of the target (scat-
tered, not reflective) and with increased brightness of the laser point to the ambient light intensity (interior spaces,
twilight). In unfavourable conditions (e.g. when measuring outdoors at intense sunlight), it may be necessary to use
the target plate.
B) In unfavourable conditions (e.g. when measuring outdoors at intense sunlight or an insufficiently reflecting sur-
face), the maximum deviation is
±10 mm per 70 m. In favourable conditions, a deviation influence of ± 0.05 mm/m
must be taken into account.
C) In the continuous measurement function, the maximum operating temperature is +40 °C.
D) Fewer measurements are possible when using 1.2 V rechargeable batteries as compared with 1.5 V batteries.
Please observe the article number on the type plate of your measuring tool. The trade names of the individual meas-
uring tools may vary.
The measuring tool can be clearly identified with the serial number 20 on the type plate.
OBJ_BUCH-703-002.book Page 19 Wednesday, July 23, 2008 3:15 PM
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Comments to this Manuals

No comments