Bosch D720B Specifications download pdf (Page 5)

Control Panels Installation | en 5

Bosch Security Systems, Inc. UL Installation Instructions F.01U.167.105 | 02 | 2010.11

Figure 1.1 Enclosure Mounting

1.4 Installing the Control Panel

1. Place the control panel over the inside back of the enclosure, aligning the large

rectangular openings of the mounting skirt with the mounting hooks of the enclosure.

Slide the control panel down so that it hangs on the hooks. Refer to Figure 1.1, Page 5.

2. Remove the tape from the #6 x 1/4-in. screw in the mounting tab on the control panel.

The screw passes through the mounting tab and into the skirt mounting hole in the

enclosure. Tighten the screw to secure the control panel in the enclosure.

3. Connect earth ground to the control panel before making any other connections. Refer to

Section 1.5 Connecting Earth Ground, page 5.

1.5 Connecting Earth Ground

1.5.1 Terminal 10

To help prevent damage from electrostatic charges or other transient electrical surges,

connect the system to earth ground at Terminal 10 before making other connections.

Recommended earth ground references are a grounding rod or a cold water pipe.

Callout Description

1 Point chart label

2 Mounting skirt hooks (2)

3 Module mounting holes (12)

4 Tamper switch mounting holes (5)

5 Skirt mounting hole (1)

6 Enclosure mounting holes (5)

7 Mounting skirt hook holes (2)

8 Back of the control panel

9 Lock down tab

1 2 3 4 5 6 7 8 9 10 ... 27 28

No comments

Bosch D720B Specifications Page 5