Bosch LTC 8600 User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
1
3
One Line to Each Remote
Satellite System Location
2
6
Allegiant Keyboard controls
any local or remote camera
on any local monitor (Video
and PTZ)
2
7
Alarm Inputs Activate Only
Local Video on Local
Monitors
Technical specifications
LTC 8600 Series System Specifications
Capacities
Video Inputs Standard: 128
Satellite configuration: 1024
Video Outputs 16
Keyboards 16
Alarm Inputs 512
Receiver/Drivers Standard: 128
Satellite configuration: 1024
Electrical
Video Bandwidth (-3 dB) 12 MHz typical
Differential Gain 1% maximum
Differential Phase 2° maximum
K Factor 0.5%
Signal-to-Noise Ratio 70 dB minimum
Crosstalk
(Input to Input Isolation)
–50 dB typical
Feedthrough
(Input to Output Isolation)
45 dB typical
Gain Unity ± 2% (into 75 Ohm termination)
Tilt 1% typical
Transient Protection
(VIM Cards)
350 W Peak Pulse Power
(tp = 8/20 µs)
Environmental
Temperature
Operating 4°C to 50°C (40°F to 122°F)
Storage –40°C to 60°C (–40°F to 140°F)
Altitude 4500 m (15,000 ft)
Humidity 0% to 95% relative, non-condensing
Vibration 3 g swept sine wave, 15 Hz to 2000 Hz
Shock 50 g, 11 ms, 1/2 sine wave
Product Regulatory Compliance
LTC 8601 Series Equipment Bay
Includes equipment rack, LTC 8610/01 microprocessor module, and
LTC 8805 Series power supply.
Power
Model No. Rated Voltage Voltage Range Nominal
Power
1
LTC 8601/60 120 VAC,
50/60 Hz
100 to 140 200 W
LTC 8601/50 220–
240 VAC,
50/60 Hz
198 to 264 200 W
1. Power at rated voltage fully loaded.
Connectors
Video Inputs 1 to 96 One (1) sync input, and 16
monitor outputs, BNC
Video Connections 97 to 128 Two (2), 34-pin ribbon
connectors used in conjunction
with the LTC 8808/00 video
interconnect panel
Looping Video Connections
1-128
Eight (8), 34-pin ribbon
connectors used in conjunction
with the LTC 8808/00 video
interconnect panel
External Accessory Interfaces
Connectors
CONSOLE 9-pin D-type RS-232 port for external PC or control
interface (Default = 19.2 k baud)
ALARM 9-pin D-type RS-232 port for Allegiant alarm
accessory unit (Default = 19.2 k baud)
PRINTER 9-pin D-type RS-232 port for system logging printer
(Default = 19.2 k baud)
SDA 9-pin D-type, TTL level, hi-speed control data
output (Bi-Phase) for interface to Allegiant series
signal distribution units (Data clock rate =
31.25 kHz)
COM PORT 1 9-pin D-type RS-485 port for external Allegiant
accessory use
COM PORT 2 9-pin D-type RS-485 port for external Allegiant
accessory use
KEYBOARDS Eight (8), 6-pin RS-485 ports for Allegiant
keyboard use
Equipment Rack
Size (W x D x H) EIA 48 cm (19 in.) rack,
483 x 420 x 267 mm
(19 x 16.5 x 10.5 in.)
Weight 11.1 kg (24.5 lb)
4 | LTC 8600 Series Allegiant Matrix/Control Systems - Modular
Page view 3
1 2 3 4 5 6

Comments to this Manuals

No comments