Bosch Solution 16plus User Manual download pdf

Intrusion Systems | CC100 Solution 16plus Control Panel

The Solution 16plus Intrusion Control Panel offers an

extensive feature listing including integrated proximity,

numerous wire free options, high speed windows

programming software and the simplest user/installer

interface on the market today.

The Solution 16plus is designed and manufactured in

Australia to meet local and international requirements.

Functions

Graphic User Interface (Code Pads)

The Graphic User Interface incorporates a text driven menu

system very similar to that found on many mobile phones.

Colour coded, illuminated keys allow for easy identification

and operation in all ambient light conditions and provide a

positive feel to the user. Red and green indicators provide

easy identification of Armed and Disarmed modes and the

in-built sounder provides audible feedback via polyphonic

like signalling tones during system operation. The sounder

emits a siren sound during alarm condition providing early

warning and the volume level is individually programmable

for each code pad connected to the system.

An enhanced version of the Graphic Code Pad incorporates

a built-in proximity reader allowing users to simply present

their token to the keypad to arm / disarm and / or unlock a

door. Children and the elderly will find this feature

extremely easy to use as no PIN codes are required for

operation.

16 On-board Zones (wired or wireless)

The Solution 16plus supports up to 16 wired zones using a

split end of line resistor configuration or dual end of line

configuration with the use of a zone expanders. Wireless

zones are supported with the inclusion of a serial radio

receiver. Zone programming determines the panel’s

response to open / short and tamper conditions on the zone

loop. Zones may be programmed individually to monitor all

types of security alarms, fire alarms and supervision

devices.

The panel supports multi-vendor wireless devices allowing

you to select the most appropriate products for each

installation.

Sensor Watch

Sensor Watch monitors each zones activity while its

corresponding area is disarmed. If the zone fails to operate

at least once during the sensor watch programmed time

period a system trouble will be initiated.

CC100 Solution 16plus Control Panel

▶

16 On-board Zones (wired or wireless)

▶

48 Users

▶

Partionable to 4 Areas

▶

Proximity Code Pad

▶

Flexible Reporting Options

▶

Fully Menu Text Programmable

▶

Programmable via SolutionlinkTM Software (Remote/

Direct)

▶

Telephone Line Fail Monitor

www.boschsecurity.com

1 2 3 4

Summary of Contents

Page 1 - Functions

Intrusion Systems | CC100 Solution 16plus Control PanelThe Solution 16plus Intrusion Control Panel offers anextensive feature listing including integr

Page 2 - Certifications and Approvals

2 | CC100 Solution 16plus Control PanelChime ModeChime mode allows monitoring a zone or group of zones bysounding the code pad buzzer or activating a

Page 3 - Ordering Information

CC100 Solution 16plus Control Panel | 3Single EOL Alarm +TamperSplit EOLSolution 16plus 1 to 8 1 to 8 1 to 16CM104 #1 9 to 16 9 to 16 n/aTotal Zones 1

Page 4

4 | CC100 Solution 16plus Control PanelAmericas:Bosch Security Systems, Inc.130 Perinton ParkwayFairport, New York, 14450, USAPhone: +1 800 289 0096Fa