Bosch WTA84100GB User Manual download pdf (Page 7)

c



c

cø@c è* * è* è* è* è* è* è*

ccccccccc@ è* è* è* è* è*

ccccccccc@

è*

è* è* è* è* è*

#ø

cø@c

è* è* è* è* è* è*

ccccccccc@ è* è*



Technical data

Dimensions (DxWxH) 60 x 60 x 85 cm

Weight approximately 35 kg

Max. capacity 6 kg

Ambient temperature 5 - 35 °C

Connection voltage 220 - 240 V

Connected load 2200 W

Fuse protection 10 A

Product number

a Rating plate or inside of the door

Production number

You can find the rating plate on the back of the dryer.

Consumption rates

These are guide values determined under standard

conditions. Deviations of up to 10% are possible.

Spin speed rpm

(residual moisture)

Drying time** in

min incl. 8 min

cooling time

Energy

consumption**

in kWh

Cottons 6 kg

Cupboard Dry* 1400 (approx. 50 %) 100 3.00

1000 (approx. 60 %) 120 3.38

800 (approx. 70 %) 140 4.00

Iron Dry* 1400 (approx. 50 %) 78 2.00

1000 (approx. 60 %) 93 2.00

800 (approx. 70 %) 108 3.00

Easy-Care 3 kg

Cupboard Dry* 800 (approx. 40 %) 44 1.00

600 (approx. 50 %) 55 1.00

*Test programmes according to DIN EN 61121.

**The values may diverge from those specified depending on overvoltage and undervoltage,

fabric type, composition of the laundry to be dried, residual moisture in the fabric and the

amount of the load.

Optional accessories (order from the after-sales service using the order number)

Exhaust air duct set (according to model)

The exhaust air is extracted via a hose.

Washer-dryer stack connection set

The dryer can be placed on top of a suitable washing machine with the same width and depth

to save space. The dryer must be fastened to the washing machine using this connection set.

If the worktop of the washing machine is less than 544 mm deep, please consult the

after-sales service or your specialist retailer.

Built-under installation

Instead of the appliance covering plate, you must have a metal cover fitted by a specialist.

Platform

For improved loading and unloading. The basket located in the drawer can be used for

carrying laundry.

WTZ

1130

WTZ

11311

WTZ

10295

WMZ

20460

What to do if ...

If you cannot rectify a fault yourself, please contact our after-sales service. We will always find

an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of

the manufacturer and rest assured that the repair will be carried out by trained service

technicians using original spare parts. The contact details of your local after-sales service can

be found in the enclosed after-sales service directory, or by calling one of these numbers:

 GB 0844 8928979

 IE 01450 2655

When contacting the after-sales service, please quote the appliance's product number (E no.)

and production number (FD) (see the inside of the door).

Set the programme selector to

Off and remove the appliance plug from the socket.

Start/Stop indicator light does

not light up.

Mains plug plugged in?

Programme selected?

Check the socket fuse.

Filter/Vent Hose indicator light

flashes.

Clean the fluff filter a page 4.

Exhaust air duct blocked or bent?

Clean the exhaust air duct a page 6.

If necessary, clean the insect screen on the exhaust air

pipe.

Dryer does not start. Start/Stop button pressed?

Door closed?

Programme set?

Programme terminated shortly after

starting.

Ambient temperature greater than 5 °C?

Water is leaking out. Make sure the dryer is level.

The door opens by itself. Push the door closed until you hear it engage.

The required degree of dryness

was not achieved or the drying time

was too long.

Clean the fluff filter a page 4.

Ambient temperature higher than 35 °C a ventilate the

room.

Unsuitable programme selected? a page 7.

Dryer installed too closely to other objects? Provide

adequate air circulation.

Mains failure a Restart the dryer.

Fine layer of limescale on the moisture sensors. Clean the

sensors

a page 6.

Laundry damp. Use the next drying programme up or the timer

programme a page 7.

Warm laundry feels damper than it really is!

The humidity in the room has

increased significantly.

Make sure the room is sufficiently ventilated.

One or more indicator lights are

flashing.

Clean the fluff filter a page 4.

Check the installation conditions a page 8.

Exhaust air duct blocked or bent?

Clean the exhaust air duct a page 6.

Switch off, allow to cool, switch back on and restart the

programme.

Power cut. Remove the laundry from the dryer immediately and

spread it out. Heat may escape.

Condensation in the exhaust air

duct.

Exhaust air duct too long? Check the maximum exhaust air

duct length. Further information a Installation instructions

for exhaust air duct.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Bosch WTA84100GB User Manual Page 7

Comments to this Manuals

Related products and manuals for Tumble dryers Bosch WTA84100GB