Bosch WTG86401UC Use and Care Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
28
Change spin speed
Press the Time Dry or Finish in button to change the
setting (allowable values are between 600 and 1800 in
increments of 100).
Quit adjustment mode
Turn the program selector to Off position. The settings
were saved.
Cleaning and care
USER-MAINTENANCE INSTRUCTIONS
9 WARNING
RISK OF EXPLOSION
Never use solvents or highly flammable liquids for
cleaning.
9 CAUTION
Improper cleaning may damage the dryer or cause
injury.
Do not spray with a hose or pressure washer.
Do not use scouring agents or all-purpose cleaners.
Do not use steam cleaners.
Do not use bleach-based wipes.
Cleaning the housing and control panel
Wipe the housing and fascia with a soft cloth and soapy
water only.
Wipe the drum, door seal and inside of the door with a
damp cloth only.
NOTICE: Do not clean with a water jet.
Remove detergent and cleaning agent residue
immediately.
During drying, water may occassionally accumulate
between the window and the seal. This does not affect
the proper operation of your dryer.
Cleaning the lint filter
A dirty filter extends the drying time and increases
energy consumption.
The filter should be cleaned before or after each drying
process.
If é indicator lights up during a drying program, clean
the filter immediately.
Tip: The program interrupts automatically.
To clean the lint filter:
1.
Switch off the dryer. Rotate the program selector to
Off.
9 CAUTION
The inside of the door heats up during the drying
process. The drum, the door and the laundry may
be hot.
2.
Open the door.
3.
Pull out filter.
4.
Open the filter.
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments