Bosch WTW87560GB Operations Instructions download pdf (Page 28)

en Installation and connection

28

:Warning

Children may lock themselves in the

dryer, putting their lives at risk!

Do not set up the dryer behind a door

or sliding door, as this may obstruct the

dryer door or prevent it from opening.

Caution!

Risk of injury

■ Due to the heavy weight of the dryer,

you may injure yourself if you lift it.

Do not lift the dryer on your own.

■ You could cut your hands on the

sharp edges of the dryer. Do not

hold the dryer by the sharp edges.

■ Protruding parts on the dryer may

break off when it is lifted or pushed.

Do not move the dryer by holding

onto protruding parts.

Caution!

Risk of material damage to the dryer or

fabrics.

■ Check the dryer for damage caused

during transportation. Never operate

a dryer if it is damaged.

■ Any residual water in the dryer may

freeze and damage the dryer. Do not

install the dryer in rooms that are at

risk of frost.

During installation, ensure that:

■ The dryer is placed on a clean, level

and firm surface,

■ The mains plug can be accessed at

all times,

■ The air inlet on the dryer is kept clear

and there is sufficient ventilation,

■ The area around the dryer is kept

clean and

■ The dryer is levelled using the

threaded feet. Use a spirit level to do

this.

Changing the condensation

drain

Notes

■ The condensation from the dryer can

either be discharged into the

condensate container or drained off

via a connection to the waste-water

system. At the factory, the

condensation from the dryer is

discharged into the condensate

container.

■ If the condensation drain is installed,

residual water remains in the

condensate container because of

the dryer's self-cleaning function.

Change the condensation drain as

follows:

1. Remove the accessory from the

dryer drum.

2. Delivery status of the dryer. The hose

for discharging the condensation

into the condensate container is

secured to the connecting piece.

3. Disconnect the hose from the

connecting piece and move it into

the "parked" position.

1 2 ... 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments