Bosch WTWH7560GB Instruction Manual download pdf (Page 31)

Home Connect en

31

3. Turn the programme selector to

position 5. §“† (reset network

settings) will appear on the display

panel.

4. Press the Start button.

5. ¢“† (yes) will appear on the display

panel.

6. Press the Start button to confirm.

“Ÿš (end) will appear on the display

panel. The network settings have

now been reset. Your appliance is

no longer connected to your home

network or the Home Connect app.

7. You can exit the Home Connect

settings by pressing the } button.

Notes

■ If the network settings could not be

reset, “§§ (fault) will appear on the

display panel.

■ If you want to operate the appliance

via the Home Connect app again,

you will need to reconnect it to your

home network and to the

Home Connect app either

automatically or manually.

Updating the software

You can update the Home Connect

software on your appliance. Whenever a

new update is available, —˜š (update)

appears in the display panel.

You can install the update directly via

the note in the display panel or via the

appliance settings.

1. Switch the appliance on.

2. Press and hold the Remote start }

button for more than 3 seconds.

‘ž£ (connect automatically)

appears in the display panel.

3. Turn the programme selector to

position 6. —˜š (update) appears in

the display panel.

The Start button flashes if a software

update is available.

4. Press the Start button.

¢“† (yes) appears in the display

panel.

5. Press the Start button to confirm.

Update installation now starts. This

process may take several minutes.

Do not switch the appliance off while

updates are being installed.

6. You can exit the Home Connect

settings by pressing the Remote

start } button.

About data protection

When your appliance is connected for

the first time to a WLAN network, which

is connected to the Internet, your

appliance transmits the following

categories of data to the Home Connect

server (initial registration):

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Comments to this Manuals

No comments