Bosch UML-262-90 User Manual download pdf (Page 32)

32 en | Installing the Monitor Full HD LCD Monitors

F.01U.172.600 | 1.0 | 2010.10 User’s Manual Bosch Security Systems, Inc.

5.6 Connecting the PC Signal to the Monitor

There are three ways to connect the PC signal to the monitor:

HDMI, DVI, and VGA.

5.6.1 HDMI Connection

Connect an HDMI cable (user-supplied) to the HDMI input on

the bottom panel of the monitor.

Figure 5.6 HDMI Input

5.6.2 DVI Connection

Connect a DVI-D cable (supplied) to one of the DVI-D inputs on

the bottom panel of the monitor.

Figure 5.7 DVI Input

5.6.3 VGA Connection

You can connect a PC signal to the monitor using the VGA

connector on the rear panel and a VGA cable (D-SUB to D-SUB).

Figure 5.8 VGA Input

Pin Description Pin Description Pin Description

1 Red Video 6 Red Ground 11 Ground

2 Green Video 7 Green Ground 12 SDA (for DDC)

3 Blue Video 8 Blue Ground 13 H-Sync or H+V Sync

4Ground 9N/A 14V-Sync

5 Ground 10 Signal Cable Detect 15 SCL (for DDC)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 53 54

No comments

Bosch UML-262-90 User Manual Page 32