Bosch LE10 User Manual download pdf

Care Solutions | LE10 Radio Receiver

With its multi-purpose operating modes, the LE10 Radio

Receiver can be used in combination with wired or wireless

NurseCall systems. The LE10 Radio Receiver is designed to

receive radio signals from different Bosch radio

transmitters at the frequency of 434.01 MHz.

Upon receiving radio signals from either programmed or not

programmed wireless transmitters, the LE10 Radio

Receiver reacts by activating its two green and red LED

indicators and by switching the relay outputs of its two

relays.

Functions

The LE10 Radio Receiver can be set to one out of seven

different operating modes in which the device behaves

accordingly to different transmitter reception.

Mode 1: Normal

20 wireless transmitters can be programmed. Calls are

indicated by LED 2 and Relay 1. A battery-low signal is

indicated by LED 2 and Relay 2.

Mode 2: Normal, with LED 2 deactivated at battery-low

indication

The same functions as in mode 1 are available, except for

the battery-low signal which is not indicated by LED 2, but

only by Relay 2.

Mode 3: Dementia

The S37L and S37E wireless transmitters are detected.

Relay 1 can be used to lock a monitored door. Relay 2 can

be used to interrupt a monitoring loop.

Mode 4: Dementia with Accompany

This mode allows the LE10 Radio Receiver to be connected

to a wired NurseCall system, in which the Accompany

function can be implemented. Here the LE10 Radio Receiver

will wait 10 seconds after receiving a signal from an S37L

transmitter. If it detects an S37E transmitter in this lapse of

time, then no alarm is generated. If not, then Relay 1 is

activated for 2 seconds.

Mode 5: Remote control

20 wireless transmitters can be programmed. Per

sequence, only the same transmitter can switch on and off

the Relay 1. A battery-low signal is indicated by LED 2 and

Relay 2.

Mode 6: Open receiver

No wireless transmitter needs to be programmed. Any

transmitter within reception range of the LE10 Radio

Receiver can activate the device.

Mode 7: Open receiver with reduced range

Same functions as in mode 6, but with reduced range. This

functionality is designed to improve reception of

transmitters located closer to the LE10 Radio Receiver.

LE10 Radio Receiver

▶

Large number of transmitters can be assigned

▶

Status indication with 2 LED indicators and 2 relays

▶

Easy programming with one button

▶

Multiple connecting possibilities

▶

Wide range of DC power supply

▶

Seven different operating modes

www.boschsecurity.com

1 2

Summary of Contents

Page 1 - LE10 Radio Receiver

Care Solutions | LE10 Radio ReceiverWith its multi-purpose operating modes, the LE10 RadioReceiver can be used in combination with wired or wirelessNu

Page 2 - Ordering Information

2 | LE10 Radio ReceiverInstallation/Configuration NotesThe following Bosch wireless transmitters are compatiblewith the LE10 Radio Receiver:- S37 Wris