Bosch NIT5068UC Installation Manual download pdf (Page 5)

Prepare Installation Space

Create the cut-out in the countertop according to the

installation diagram. The angle of the cut surface to the

countertop must be 90°.

The lateral cut-out edges must be flat in order to ensure

that the retaining springs are positioned properly on the

appliance. With multi-layered countertops, secure strips

laterally in the cut-out if necessary.

After creating cut-out, remove shavings. Seal cut

surfaces in a heat- and water-resistant manner.

Observe minimum distance between device underside

and cabinet surfaces of

" (10 mm).

The worktop into which the cooktop is installed must be

heat-resistant up to 140° F (90 °C).

The worktop must be reinforced if it is less than

inch

(20 mm) thick.

If the thickness of the worktop into which the cooktop is

installed does not comply with the specifications,

reinforce the worktop using a fire- and water-resistant

material until it reaches the minimum thickness.

Otherwise, sufficient stability cannot be guaranteed.

▯ The worktop into which the cooktop is installed should

withstand loads of approx. 133 lbs (60 kg).

▯ Only check the evenness of the cooktop after it has

been installed.

Cutout dimensions for 30" cooktops

Models: NIT5068UC, NIT8068SUC, NIT8068UC,

NITP068SUC, NITP068UC

PLQPP



PP



PP

PLQPP



[

¡

PP

PLQPP

PLQ

PP

PLQ

PP

1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments

Bosch NIT5068UC Installation Manual Page 5

Comments to this Manuals

Related products and manuals for Unknown Bosch NIT5068UC