Bosch Security Systems | 2006-05 | 9922 141 50741 en
Plena Weekly Timer | Installation and User Instructions | Programming a schedule en | 26
7.3 Viewing and editing events
To view or edit an event, first follow steps 1 through 7 of
section 7.2. When the event symbol starts to flash, you
can either:
• turn the rotary selector to select other previously
programmed events, and then press the rotary
selector to continue editing that event as further
described in section 7.2.
• press the Pause button to delete the entry. After a few
seconds the full display will re-appear and the word
RUN will be displayed in the top left-hand corner.
This indicates that editing of the event is complete,
and that the Timer is running.
• press the rotary selector to confirm the new event as
described in step 8 of section 7.2.
Note
Once you have pressed the rotary selector to
either “confirm a new event” or “edit an existing
one”, you will have to continue programming
that event. You cannot return to previous events
in any one programming session.
Comments to this Manuals