Bosch AMC2 ENC-UL1 - Enclosure - Small User Manual download pdf (Page 8)

8 en AEC-AMC2-UL1 - Installation manual

F.01U.097.252 | V 3.2 | 2010.01 Bosch Sicherheitssysteme GmbH

Connection of the Devices

Figure 4 Connection of the devices

1. Mount the AMC on the rail (item 2 in Figure 1) and left

aside the power supply.

2. Put the rechargeable batteries on the bottom of the

housing and secure them with the cable ties F - (Figure 2).

3. Stick the bracket J (Figure 2) on the back of the housing in

such a way that later on not used connectors of the cable

B can fixed with it.

4. Cable set A:

a. Connect the 7-pin plug A1 to the AMC’s power supply

connector (labeled: POWER).

b. Attach connectors A3 to the PS-interface DC and A2

to the interface labeled OK.

c. Connect the grounding cable A4 beneath the

grounding point 3.

5. Cable set B:

NOTICE!

The following steps describe connecting the rechargeable

batteries in 24 V mode. For information on 12 V mode

connections, refer to Section 12 V Mode Variations, page 11.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 87 88

No comments

Bosch AMC2 ENC-UL1 - Enclosure - Small User Manual Page 8