Bosch WIA20000EE Installation Manual download pdf (Page 24)

Removing the transport locks

Unscrew all four screws

using the spanner

supplied.

Completely remove all transport locks and

take the mains cable out of the retainers.

Insert the protective

covers.

– Before using the appliance for the first

time, ensure that all transport locks have

been removed and kept safe for any

subsequent transport.

– For transporting at a later stage: You must

make sure that the transport locks are

refitted, which will prevent the washing

machine from being damaged.

Positioning and

levelling

– Appliance stability is essential to ensure that the washing machine

does not “creep” during spin cycles.

– The installation area must be firm, clean and level.

– Parquet floors and soft floor coverings, e.g. carpets or foam-backed

floor coverings, are unsuitable.

Levelling

Intense noise, vibrations and “wandering” may be the result of incorrect

levelling.

– All four appliance feet must stand firmly on the ground.

– The washing machine must not rock.

– Check the alignment of the washing machine with a spirit level and

adjust if necessary.

– The washing machine must not rest against the side panels of the

installation recess.

– The lock nuts on the front feet of the appliance must be screwed firmly

against the housing with the spanner.

Dimensions

Width x depth x height 596 mm x 585 mm x 818 mm

Weight 76 kg

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Bosch WIA20000EE Installation Manual Page 24