Bosch DKE606A Installation Manual download pdf (Page 13)

13

5. Screw on the bracket for fixing the flue

ducts.

6. In order to help fix the hood onto the wall,

screw in 2 screws until it protrudes by

approx. 5 mm.

7. Hook the extractor hood over the screws

in the wall, align the extractor hood

properly.

8. Mark 2 lower fixing points.

Remove the hood and drill 2 holes (dia. 8

mm) on the marked points. Fit 2 wall

plugs, Hang again the hood and fix the

hood permanently with 2 screws.

9. Connect up the air outlet pipe.

10. Connect the hood to the electricity

supply.

Installation

11. Stainless steel model:

Remove the protective film from the two

flue ducts.

Avoid damage to the sensitive

surface.

12. Screw the upper flue duct to the sides of

the fixing bracket with 2 short screws.

13. Position the lower flue duct on the

extractor hood, align the flue duct.

To prevent scratching the upper duct

when pushing on the lower duct, cover

the edge of the lower duct with the

installation template or other protective

material.

14. Re-insert the grease filter (see operating

instructions).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Comments to this Manuals

No comments