#2-.8>7=7<=;>,=287<
The holster may be mounted to shelf or
workbench side walls through the side
mounting holes using the hardware provided
(Fig. 11).
1. Determine desired mounting position and
orientation. Holster may be mounted from
either its left or right side. See Fig. 12a
for acceptable mounting positions.
2. If mounting holes are not available, mark
and pre-drill holes for side mounting bolts.
Side mounting bolt spacing is 10 inches
(254mm).
3. Remove Bolt 1 (Fig. 10a) from bottom
side mounting hole.
4. Attach holster to wall as shown in Fig. 11
*<=.7 185<=.; <.,>;.5B =8
<2-. @*55< Holster not
securely fastened may become dislodged
and lead to personal injury
8>7= 185<=.; 27 875B
; . , 8 6 6 . 7 - . -
8;2.7=*=287< Failure to properly orient
holster may cause holster and/or power tool
to become dislodged and lead to personal
injury.
-12-
Comments to this Manuals