Bosch EnviroDome Installation Manual download pdf (Page 3)

Safety Precautions

For Indoor Product

1. Water and Moisture - Do not use this unit near

water - for example, in a wet basement, in an

unprotected outdoor installation, or in any area

classified as a wet location.

2. Object and Liquid Entry - Never push objects of

any kind into this unit through openings, as they

may touch dangerous voltage points or short out

parts that could result in a fire or electrical shock.

Never spill liquid of any kind on the unit.

3. Power Cord and Power Cord Protection - For

units intended to operate with 230VAC, 50Hz,

the input and output power cord must comply

with the latest versions of IEC Publication 227 or

IEC Publication 245.

Power supply cords should be routed so they are

not likely to be walked on or pinched. Pay partic-

ular attention to location of cords and plugs, con-

venience receptacles, and the point of exit from

the appliance.

4. Overloading - Do not overload outlets and

extension cords; this can result in a risk of fire or

electrical shock.

For Outdoor Product

Power Lines - An outdoor system should not be

located in the vicinity of overhead power lines,

electric lights, or power circuits, or where it may

contact such power lines or circuits. When

installing an outdoor system, extreme care should

be taken to keep from touching power lines or

circuits, as this contact might be fatal. U.S.A.

models only - refer to the National Electrical

Code Article 820 regarding installation of CATV

systems.

For Rack-Mount Product

1. Ventilation - This unit should not be placed in a

built-in installation or rack, unless proper ventila-

tion is provided, or the manufacturer’s instruc-

tions have been adhered to. The equipment must

not exceed its maximum operating temperature

requirements.

2. Mechanical Loading - Mounting of the equip-

ment in a rack shall be such that a hazardous con-

dition is not achieved due to uneven mechanical

Safety Precautions

Installation should be performed by qualified

service personnel only in accordance with the

National Electrical Code or applicable local

codes.

Power Disconnect. Units with or without

ON-OFF switches have power supplied to the

unit whenever the power cord is inserted into the

power source; however, the unit is operational

only when the ON-OFF switch is in the ON posi-

tion. The power cord is the main power discon-

nect for all units.

CAUTION: TO REDUCE THE RISK OF ELEC-

TRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

This symbol indicates the presence of unin-

sulated “dangerous voltage” within the prod-

uct’s enclosure that can cause an electric

shock.

This symbol indicates the presence of

important operating and maintenance (ser-

vicing) instructions in the literature accom-

panying the appliance.

1 2 3 4 5 6 7 8 ... 39 40

Comments to this Manuals

No comments

Bosch EnviroDome Installation Manual Page 3

Comments to this Manuals

Related products and manuals for Bridge cameras Bosch EnviroDome