Bosch EX14N User Manual download pdf (Page 47)

FPA-1000-UL Fire Alarm Control Panel

Quick Guide — Accessories

Control Panel Accessories

Programming Tool

FPE-1000-CITY City Tie Plug-in Module

Provides two circuits that can be programmed as Local Energy or

Reverse Polarity module.

FPE-1000-SLC Signaling Line Circuit Module

Provides a Signaling Line Circuit for connection of analog DCP de-

vices to the FPA_1000_UL Compact Fire Panel. A second Signaling

Line Circuit can easily be added by plugging in the FPE-1000-SLC

to the mainboard. Nominal 39 V DC (30 to 40 V DC), 200 mA

maximum (per SLC), power-limited, supervised.

FPM-1000-SFMK Semi-ﬂush Mounting Kit

Includes trim ring and mounting accessories.

BATB-40 / BATB-80 Battery Box

Provides a single level (two-battery capacity) of battery storage with

an optional shelf that increases the battery capacity to four batter-

ies. BATB-80 includes a mounted shelf that holds up to

four batteries.

D126 (12v 7ah), D1218 (12v 18ah), D1224 (12v 24ah), D1238

(12 38ah) Secondary Battery

2 x 12 V, 18 Ah maximum within enclosure or 40 Ah

maximum external.

FPP-RNAC-8A-4C Remote Notiﬁcation Appliance Circuit Power

Supply

The FPP-RNAC-8A-4C Remote NAC Booster adds four additional

Notiﬁcation Appliance Circuits: NFPA 72, Class B (Style Y) or Class

A (Style Z) to the ﬁre panel or serves as a power supply for ﬁre

protective signaling systems.

D7050: Analog Device Programmer

Handheld device that programs address settings on EEPROM

programmable analog devices. Includes base for detector head

programming and two-module program adapter for module

programming (for 4-in or single-gang back box). Shows the current

analog value of a connected detector.

Option Bus Accessories

D7030X LED Annunciator

Identiﬁes the location of a ﬁre alarm for up to eight zones allowed

per system.

D7030X -S2 LED Annunciator

Features two zones reserved for supervisory functions. Incorpo-

rates power and trouble LEDs plus eight-zone LEDs that can be

individually labeled.

D7030X-S8 LED Annunciator

Features eight zones reserved for supervisory functions. Incorpo-

rates power and trouble LEDs plus eight-zone LEDs that can be

individually labeled.

D7035/B Octal Relay Module

The FPA-1000-UL supports up to two Octal Relay Modules. The

outputs are fully programmable and can be activated by system

events. These outputs have the same programming options as the

local relays. Each output operates independently of the other seven

to provide complete ﬂexibility.

D7048/B Octal Driver Modules

The outputs are fully programmable and can be activated by system

events. These outputs have the same programming options as the

local relays. Each output operates independently of the other seven

to provide complete ﬂexibility.

D7032 Eight-Zone LED Annunciator Expander

Attaches to a D7030X, D7030X-S2 or D7030X-S8.

Identiﬁes the location of a ﬁre alarm for eight additional zones,

showing 16 LED zones in the D7030X/D7032 combination.

FMR-1000-RA Remote Annunciator

Remote LCD annunciator featuring acknowledge key. Includes

scrolling keys and built-in piezo sounder.

Initiating Devices

FAA-325-B6 Analog Detector Base

Compatible with all analog addressable detectors that use the

advanced analog communication protocol, except the ALG-DH. 6 in

(15 cm) diameter.

FAA-325-B4 Analog Detector Base

Compatible with all analog addressable detectors that use the

advanced analog communication protocol, except the ALG-DH. 4 in

(10cm) diameter.

FAP-325 Analog Photoelectric Smoke Detector

Detects optically dense smoke typical of ﬁres involving materials

such as soft furnishings, plastic and foam, which tend to smolder

and produce large, visible smoke particles.

FAH-325 Analog Heat Detector

Detects heat in environments where smoke detectors are unsuitable

because of the presence of system or cooking fumes, such as

a kitchen.

FFAD-325 Series Analog Duct Smoke Detector

Provides early detection of smoke and products of combustion

present in air moving through HVAC ducts in commercial, industrial

and residential applications.

Three types available:

e FAD-325-DH Analog Duct Smoke Detector

Replacement Head

e FAD-325 Analog Duct Smoke Detector (with Housing)

e FAD-325-R Analog Duct Smoke Detector with two Relays

(with Housing)

Accessories

e FAA-325-2.5 Testing Tube, 2.5 ft length

e FAA-325-5 Testing Tube, 5 ft length

e FAA-325-10 Testing Tube, 10 ft length

FMM-325A/FMM-325A-D Analog Manual Pull Station

Fast response contact monitor module mounted in a corrosion-

resistant, rugged, die-cast housing for single-gang mounting.

Loop powered.

Input/Output Modules

FLM-325-I Series Fast Response Contact

Monitor Modules

Designed for use with pull stations, water ﬂow switches and other

applications requiring the monitoring of dry contact alarm initiating

devices. Can be programmed in NO EOL, NC EOL, NC no EOL.

Three types available:

e FLM-325-I4 with 4-in Back Box

e FLM-325-IS with Terminal Screws (future release)

e FLM-325-IW with Pigtail (future release)

FLM-325-CZM4 Conventional Zone Module

Monitors dry contacts (NO) devices such as two-wire conventional

detectors and pull stations. Transmits the status of one zone

of devices back to the panel (25 maximum per zone; number

depends on type of connected devices). Class A or Class B wiring

is conﬁgured with a jumper on the module. Auxiliary powered. The

number of Conventional Zone Modules (CZM) per SLC module is

limited to 64.

FMR-1000-RCMD Remote Command Center

Remote operational terminal of the FPA-1000-UL panel, providing

buttons for silence, reset, acknowledge and drill. Features scrolling

keys, key switch with 1358 key and built-in piezo sounder.

FLM-325-2I4 Dual Input Monitor Module

Provides two independent contact monitoring circuits while utilizing

only one address on the SLC. Can be programmed to monitor

normally open or normally closed contact ﬁre alarm and supervisory

devices (NO EOL, NC EOL, NC no EOL). Supervises with Style B

(Class B). Loop powered.

FLM-325-2R4 Dual Relay Module

Allows independent control of two Form C contacts (rated for 1.0

A at 30 VDC or 0.5 A at 125 VDC) for a variety of normally open

(NO) and normally closed (NC) contact applications such as fan

operation, elevator recall, door closure and auxiliary notiﬁcation.

Loop powered.

FLM-325-ISO Short Circuit Isolator

Isolates a shorted section on a speciﬁc polling circuit from the rest

of the system to minimize the loss of devices.

FLM-325-N4 Supervised Output Modules

Provide a supervised pole reversal output used for acoustic and

optical signaling devices or to trigger a Remote NAC Booster.

Require a 24 VDC auxiliary input voltage. The output relay is rated to

supply 2 A at 30 VDC. Provide Steady, Pulsing and Temporal Code

3 output pattern.

FAI-325 Analog Ionization Smoke Detector

For use in areas where early warning of superheated or ﬂaming

combustibles is expected. Also designed for use where outside

Radio Frequency Interference (RFI) and other electrical interference

are expected.

FAA-325-B6S Analog Sounder Base

Contains an addressable sounder that provides an audible alarm

in the immediate vicinity. Compatible with all analog addressable

detectors that use the advanced analog communication protocol,

except the ALG-DH. Auxiliary powered. The Analog Sounder base’s

address is programmed automatically. (For this device, the address

of the mounted detector plus 127 come up to the sounder

base address.)

Page 47

1 2 ... 42 43 44 45 46 47 48

Comments to this Manuals

No comments

Bosch EX14N User Manual Page 47

Comments to this Manuals

Related products and manuals for Bridge cameras Bosch EX14N