Bosch KIL82AF30G User Manual download pdf (Page 19)

en

19

Appliance self-test

Your appliance features an automatic

self-test program which shows you

sources of faults which may be repaired

by customer service only.

Starting the appliance self-test

1. Switch off the appliance and wait

5 minutes.

2. Switch on appliance and hold down

the super button, Fig. "/2, for

3–5 seconds within the first

10 seconds until an acoustic signal

sounds.

The self-test programme starts.

While the self-test is running, a long

acoustic signal sounds.

When the self-test ends and an acoustic

signal sounds twice, your appliance is

in working order.

If the Super button flashes for

10 seconds and 5 acoustic signals

sound, there is a fault. Inform customer

service.

Ending the appliance self-test

When the programme has ended, the

appliance switches over to normal

operation.

Fault Possible cause Remedial action

The refrigerating unit

is switching on more

frequently and for longer.

Appliance opened

frequently.

Do not open the appliance unnecessarily.

The ventilation openings

have been covered.

Remove obstacles.

The temperature

in the refrigerator

compartment is too cold.

Freezer compartment door is

open.

Close the freezer compartment door.

The freezer compartment door engages

audibly.

Temperature has been set

too low.

Increase the temperature.

The Super function is

switched on.

Switch off Super function.

Appliance is not cooling,

temperature display and light

are lit.

Showroom mode is

switched on.

Hold down alarm button, Fig "/5, for

10 seconds until an acknowledgement signal

sounds.

After a short time check whether your

appliance is cooling.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25

Comments to this Manuals

No comments