Bosch Divar Instruction Manual download pdf (Page 15)

Divar Control Center | Operation Manual | Viewing live images EN | 13

Bosch Security Systems

English

Pan and tilt

1. Select the cameo of the camera you want to control.

2. Click and hold the up and down arrows for tilt.

3. Click and hold the left and right arrows to pan.

4. Click the lock-out icon to request exclusive control for PTZ, pre-position and

aux commands of the active camera.

5. Click the lock-out icon again or select another active camera to unlock it.

> When a user with higher priority requests exclusive privileges, the lower priority

user loses control of the locked-out camera.

PTZ speed

Drag or click the slider to adjust the speed of the PTZ controls.

> There are eight discrete speed levels.

Zoom, Focus, and Iris

1. Select the cameo of the camera you want to control.

2. Click the left zoom button to zoom out; click the right zoom button to zoom in.

3. Click the left focus button for near focus; click the right focus button for far

focus.

4. Click the left iris button to close the iris; click the right iris button to open the

iris.

Moving a camera to a pre-position

To move the active camera to a pre-position:

1. Enter a pre-position number.

2. Click Shot (or press enter).

Click buttons one to five for immediate positioning to one of the first five pre-

positions.

To store the current position of the camera in a pre-position:

1. Enter a pre-position number.

2. Click Set.

Aux functions

Aux commands are special commands for controlling AutoDome™ cameras.

To switch on the Aux command:

1. Enter an Aux number

2. Click Aux On (or press enter).

3. To switch off the Aux command, click Off.

Zoom

Focus

Iris

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

No comments

Bosch Divar Instruction Manual Page 15