CCTV | IP Network Video | Technical Brief | DIVAR IP 3000 Field Installation Guide | 4
Bosch Security Systems, Inc.
800.289.0096
• Once you are logged into Windows there will be a
series of automated scripts that run. These scripts
perform important setup tasks that include:
o Drive letter assignment
o VHD creations
o iSCSI target creation
o LUN formatting
• Script processing may take several minutes, be
patient
o Do NOT interrupt this process
o Process interruption may lead to the need to
re image the appliance.
NOTE: After this process the appliance will reboot. If the
DVI video connection is the preferred connection switch
adapters during re-boot.
Kiosk Mode and Device IP Assignment
Upon reboot, the appliance will automatically boot to a KIOSK interface. This interface allows access to the following:
• BVMS Configuration Wizard
• BVMS Operator Client
• BVMS Configuration Client
If deploying new Bosch video devices in a non DHCP environment, all devices will be configured with their factory default IP address of
192.168.0.1. Initial configuration using the Configuration Wizard will not be possible. You have two options to configure static addresses
to your Bosch IP cameras and encoders
• BVMS Configuration Client
• Bosch Configuration Manager
Both of these options will be covered prior to covering the Configuration Wizard.
Comments to this Manuals