Bosch SM048 Specifications download pdf (Page 3)

Model Nomenclature | 3SM CS Series Heat

8 733 920 846 (2014/01)Revised 01-14

MODEL NOMENCLATURE

KEY TO SYMBOLS

Warnings

The following keywords are defined and can be

used in this document:

• NOTE indicates a situation that could result in

damage to property or equipment.

• CAUTION indicates a situation that could

result in minor to medium injury.

• WARNING indicates a situation that could

result in sever injury or death.

• DANGER indicates a situation that will result in

severe injury or death.

Important Information

SAFETY WARNINGS

SM 024 - 1 CS C - F

SERIES WATER CONNECTIONS

SM F - Front

SIZE

COAX OPTIONS

024 C - Copper

036 N - Cupro-Nickel

048

060

CABINET CONFIGURATION

070 CS - Condensing Section

VOLTAGE DESIGNATIONS

1

- 208/1/60 & 230/1/60

Revision Level A

Warnings in this document are identified by

a warning triangle printed against a grey

background. Keywords at the start of the

warning indicate the type and seriousness

of the ensuing risk if measures to prevent

the risk are not taken.

This symbol indicates important information

where there is no risk to property or people.

Installation and servicing of this equipment

can be hazardous due to system pressure

and electrical components. Only trained

and qualified personnel should install,

repair, or service the equipment.

Before performing service or maintenance

operations on the system, turn off main

power to the unit. Electrical shock could

cause personal injury or death.

All refrigerant discharged from this unit

must be recovered WITHOUT EXCEPTION.

Technicians must follow industry accepted

guidelines and all local, state, and federal

statutes for the recovery and disposal of

refrigerants. If a compressor is removed

from this unit, refrigerant circuit oil will

remain in the compressor. To avoid leakage

of compressor oil, refrigerant lines of the

compressor must be sealed after it is

removed.

To avoid equipment damage, DO NOT use

these units as a source of heating or cooling

during the construction process. Doing so

may affect the unit’s warranty. The

mechanical components and filters will

quickly become clogged with construction

dirt and debris, which may cause system

damage.

1 2 3 4 5 6 7 8 ... 40 41

Comments to this Manuals

No comments