Bosch PCR915B91A Operations Instructions download pdf (Page 7)

Before connecting the unit, check whether the local

connection conditions (type of gas) are compatible with

the unit’s setting. Observe any special conditions

imposed by local suppliers (utilities). The specifications

of this cooktop are stated on the data label located on the

bottom of the cooktop base.

A duplicate data label is supplied for adhesion to an

accessible location near the hotplate if the data label on

the base of the hotplate cannot be accessed when the

hotplate is installed.

Clearances

A range hood fitted above the top must be installed

according to the installation instructions for the range

hood. A minimum distance of 650 mm is required for a

range hood and 750 mm for an exhaust fan.

Any adjoining wall surface situated within 200 mm from

the edge of any hob burner must be a suitable non-

combustible material for a height of 150 mm for the

entire length of the hob. Any combustible construction

above the hotplate must be at least 650 mm above the

top of the burner and no construction shall be within

450 mm above the top of the burner.

A minimum depth of 50 mm from the top of the worktop

surface must be provided for the appliance.

If the base of the hotplate can be touched, a protecting

shield must be fitted. This shield must be at least 10 mm

from the lowest part of the hotplate and must be capable

of withstanding the appliance temperatures. Minimum

thickness of benchtop is 30 mm. See Fig. 2.

If an oven is positioned below the cooktop the barrier

does not need to be fitted, but a space of 35 mm must

be maintained between the underside of the cooktop and

the top of the oven.

Fig. 2

1 2 3 4 5 6 7 8 9 10 11 12 ... 20 21

No comments

Bosch PCR915B91A Operations Instructions Page 7