Bosch TDA3020GB Instruction Manual download pdf (Page 13)

11. After ironing

1. Switch the steam regulator (3) from [ ] to

“max” and back again several times (self-

cleaning).

2. Empty the tank. Hold the iron with the

point down and shake lightly.

3. Allow the soleplate (7) to cool down.

4. Store the iron standing on the rear, not on

the soleplate. Do not wrap the power cord

(14) too tight!

Tips to help you save

energy

Steam production consumes the most

energy. To help minimise the energy used,

follow the advice below:

1. Start by ironing the fabrics that require

the lowest ironing temperature. Check the

recommended ironing temperature in the

label on the garment.

2. Regulate the steam according to the

selected ironing temperature, following

the instructions in this manual.

3 Only use steam if necessary. If possible,

use the spray function instead. Try to iron

the fabrics while they are still damp and

reduce the steam setting. Steam will be

generated from the fabrics rather than the

iron.

If you tumble dry your fabrics before

ironing them, set the tumble drier on the

‘iron dry’ program.

4. If the fabrics are damp enough, turn off

the steam regulator (3) completely.

5. Stand the iron upright during pauses.

Resting it horizontally with the steam

regulator on generates wasted steam.

13

B O S C H

* Model dependent

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments