Bosch IntuiKey Installation Guide download pdf (Page 26)

EN | 22

Monitoring with VIDOS IntuiKey Bosch Security Systems | 2005-09 | V3.0

Installation and Operating Manual | VIDOS IntuiKey

Example: Display camera on monitor

This sequence of entries shows an example of how the data sent from a camera

is displayed on a monitor.

1. Press Mon.

2. Enter the number of the monitor.

If you make a typing error, press Clr and enter the number again.

3. Press

↵ (Enter) to confirm the entry.

The control panel now expects you to enter the number for the camera.

4. Enter the number of the camera you want to connect.

If you make a typing error, press Clr and enter the number again.

5. Press

↵ (Enter) to confirm the entry.

The data from the camera is displayed in the selected monitor window.

Note

A salvo is connected in the same way as a camera. Instead of the camera

number enter the number of the salvo.

If a salvo has several outputs, output 1 is connected to the selected

monitor and all subsequent outputs are successively connected to the next

monitors in numerical order.

Controlling the camera

You can control controllable cameras using the joystick as soon as they are

connected to the active monitor:

– Push the joystick in the desired direction to pan or tilt the camera.

A firmer push speeds up the camera's movement.

– Rotate the head of the joystick to zoom in or out.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

No comments

Bosch IntuiKey Installation Guide Page 26