Bosch CRS-CP-MD-TA User Manual download pdf (Page 9)

ManDown Sensor

User Manual 953.64c Bosch Security Systems Page 9

6.3. Replacing the battery

Necessary tool for opening the sensor case:

Jeweler’s Screwdriver 2.9mm

 Turn off the ManDown Sensor. See chapter 4.2. Turning off the sensor.

 Unscrew the four screws of the case, as shown in Fig. 3. Bottom view of the ManDown

Sensor.

 Carefully remove the compression foam, as well as the used battery.

 Replace the new battery; ensure that it is in the correct position.

 Carefully place the compression foam as shown in Fig. 4. Opening the ManDown Sensor.

 Close the case with the four screws.

Notice!

To avoid deteriorating the inserts, do not force the screwing.

VARTA battery

3V CR1/2AA

Fig. 4. Opening the ManDown Sensor

Compression foam

Fig. 3. Bottom view of the ManDown Sensor

The arrows show the screws of

the transmitter case

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Bosch CRS-CP-MD-TA User Manual Page 9