Bosch HMT75G654B Instruction Manual download pdf (Page 10)

Malfunction table

Malfunctions often have simple explanations. Please refer to the

malfunction table before calling the after-sales service.

If a meal does not turn out exactly as you wanted, refer to the

Tested for you in our cooking studio section, where you will

find plenty of cooking tips and tricks.

: Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried

out by one of our trained after-sales engineers.

You can take remedial action yourself for some error

messages.

Troubleshooting

After-sales service

Our after-sales service is there for you if your appliance needs

to be repaired. We will always find the right solution in order to

avoid unnecessary visits from a service technician.

E number and FD number

When calling us, please give the product number (E no.) and

the production number (FD no.) so that we can provide you with

the correct advice. The rating plate bearing these numbers can

be found on the right-hand side when you open the appliance

door. To save time, you can make a note of the number of your

appliance and the telephone number of the after-sales service

in the space below, should it be required.

Please note that there will be a fee for a visit by a service

technician in the event of a malfunction, even during the

warranty period.

Please find the contact data of all countries in the enclosed

customer service list.

To book an engineer visit and product advice

Trust the expertise of the manufacturer, and rest assured that

the repair will be carried out by trained service technicians

using original spare parts for your domestic appliance.

This appliance corresponds to the standards EN 55011 and

CISPR 11. It is a Group 2, Class B product.

Error message Possible cause Remedy/note

The appliance does not work The plug is not plugged in. Plug the plug in

Power failure Check whether the kitchen light works.

Faulty circuit breaker Look in the fuse box to make sure that the cir-

cuit breaker for the appliance is in working

order.

Faulty operation Switch off the circuit breaker in the fuse box.

Switch it back on after approx. 10 seconds.

Three zeros light up in the display. Power failure Reset the time.

The appliance is not in operation. A

cooking time appears in the display.

The rotary selector was actuated acciden-

tally.

Press the Stop button.

The Start button was not pressed after set-

ting.

Press the Start button or cancel the setting with

the Stop button.

The microwave does not work. The door was not fully closed. Check whether food residue or debris is

trapped in the door.

The Start button was not pressed. Press the Start button.

It takes longer than before for the

food to heat up

The microwave power level setting was too

low.

Select a higher microwave power setting.

A larger amount of food than usual has

been placed in the appliance.

Double the amount – double the time.

The food was colder than usual. Stir or turn the food during cooking.

The turntable makes a scratching or

grinding noise.

Dirt or debris in the area around the turnta-

ble drive.

Clean the roller ring and the recess in the cook-

ing compartment.

Microwave operation has been can-

celled for no apparent reason.

The microwave has a fault. If this fault occurs repeatedly, please call the

after-sales service.

"M" appears in the display. The appliance is in demo mode. Press and hold the Start button and the Stop

button for approx. 7 seconds.

Demo mode is deactivated.

E no.

FD no.

After-sales service

GB 0844 8928979

Calls from a BT landline will be charged at up to 3

pence per minute. A call set-up fee of up to 6 pence may

apply.

IE 01450 2655

0.03 € per minute at peak. Off peak 0.0088 € per

minute.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Bosch HMT75G654B Instruction Manual Page 10

Comments to this Manuals

Related products and manuals for Microwaves Bosch HMT75G654B