Bosch 5412L Operations Instructions download pdf (Page 12)

Assembly

Tighten the cover plate screw.

Loose cover plate screw may inter-

fere with and hang-up lower blade guard. Never use

saw without cover plate securely in place. Lower

guard will not function properly.

9. Be sure the arbor lock is released so the blade

turns freely.

After installing a new blade,

make sure the blade does not

interfere with the table insert at the 0° and 45 °

bevel positions. Lower the blade into the table slot

and check for any contact with the base or turn table

structure. If blade contacts base or table, seek autho-

rized service.

10. Place multi purpose tool in rubber grommet in right

rear of tool.

Assembling Dust Elbow And Dust Bag

1. With the miter arm locked in the down position,

push the dust elbow onto the dust port. Push the

dust bag onto the elbow and rotate both to desired

position. (Figure 4).

Dust

Port

Dust Bag Dust Elbow

Figure 4. Dust Elbow and Dust Bag

2. Position dust chute/bag so that it does not interfere

with the tool during the cutting operation for all

miter/bevel settings. Make sure dust bag does not

interfere with the slide rails during slide cutting.

3. The dust bag requires emptying when full of

sawdust. Empty it frequently and after completion

of sawing. Carefully remove dust bag from dust

elbow. Empty dust bag in proper trash

bin by unzipping the bag. Be extremely careful of

dust disposed, materials in fine particle form may

be explosive. Do not throw sawdust on an open

fire. Spontaneous combustion, may in time,

result from mixture of oil or water with dust

particles.

Note: The dust port also accepts a standard 1-1/4"

vacuum tube for dust collection.

When sawing chemically pressure

treated lumber, paint that may be

lead based, or any other materials that may contain

carcinogens, use special precautions. A suitable res-

pirator must be worn by all personnel entering the

work area. Work area should be sealed by plastic

sheeting and persons not protected should be kept

out until work area is thoroughly cleaned.

12.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 111 112

Comments to this Manuals

No comments

Bosch 5412L Operations Instructions Page 12

Comments to this Manuals

Related products and manuals for Mitre saws Bosch 5412L