Bosch GML 20 Professional Operations Instructions download pdf (Page 10)

English | 23

Bosch Power Tools 1 609 929 W27 | (1.3.10)

Setting the Rod Antenna

The construction site radio is provided with a

mounted rod antenna 10. For radio operation,

point the rod antenna toward the direction that

enables the best reception.

When the reception is insufficient, position the

construction site radio at a different location

that enables better reception.

Note: When operating the construction site ra-

dio in the direct vicinity of radio-communication

equipment or radio transceivers, the radio re-

ception can be subject to interference.

If the rod antenna 10 should become loose,

tighten it directly at the housing by turning in

clockwise direction.

Setting/Storing Radio Stations

Press the “Source” button 22 until m “FM” is

indicated for the ultra-short wave reception

range or “AM” for the medium wave reception

range.

To set a certain radio frequency, turn the

“Tune” adjustment knob 19 clockwise to in-

crease the frequency, and anticlockwise to de-

crease it. During setting, the frequency is indi-

cated in display section n, then in j.

To scan for radio stations with a high signal

strength, press and briefly hold the “– Seek”

button 23 to scan down and the “Seek +” but-

ton 21 to scan up the frequency scale. The fre-

quency of the found radio station is briefly indi-

cated in display n and then in j.

When the reception of a suitable signal is suffi-

ciently strong, the construction site radio auto-

matically switches to stereo reception. The indi-

cator for stereo reception i appears on the

display.

To store a set station, press the “Memory” but-

ton 16. The “PRESET” indicator e flashes in the

display and the number of the last preset in d.

To select a preset, press the “– Seek” button 23

to scan down and the “Seek +” button 21 to

scan up, until the desired preset is displayed in

indicator d. Press the memory button 16 again

to store the set station as the selected preset.

The indicators e and d no longer flash.

A total of 20 FM and 10 AM stations can be pre-

set. Please note that an already occupied preset

is overwritten when a new radio station is as-

signed to it.

For playback of a preset station, briefly press

the “– Seek” button 23 to scan down or the

“Seek +” button 21 to scan up, until the desired

preset is displayed in indicator d and “PRESET”

is displayed in e.

Connecting External Audio Sources

(see figure C)

Apart from the integrated radio, various external

audio sources can be played.

AUX-In connection 1: The AUX-In connection 1

is particularly suitable for audio sources to be

placed outside of the digital media bay (e.g. a

CD player). Remove the protective cap of the

“AUX 1 IN” socket 28 and insert the 3.5 mm

plug of the provided or of another matching AUX

cable into the socket. Connect the AUX cable to

an appropriate audio source.

After removing the AUX cable, reattach the pro-

tective cap of the “AUX 1 IN” socket 28 to pro-

tect against dirt/debris.

For external audio sources via the following con-

nections, open locking latch 8 and open lid 9 of

the “Digital Media Bay”.

– SD/MMC connection: Insert a SD or MMC

card into the SD/MMC slot 34. The labelling

of the card must face toward the fuse cap 31.

Playback of the card can be started as soon

as the track number as well as the number of

available tracks on the card are displayed in

indicator d. To remove the card, briefly press

on the card, which is then ejected.

– USB connection: Insert a USB stick (or the

USB plug of an appropriate audio source) in-

to USB port

33. Playback of the USB stick can

be started as soon as the track number as

well as the number of available tracks on the

stick are displayed in indicator d. To remove

the USB stick, pull it out of the USB port.

– AUX-In connection 2: AUX-In connection 2 is

particularly suitable for audio sources that

can be placed inside of the digital media bay

(e.g. a MP3 player). Insert the 3.5 mm plug of

the provided AUX cable into the “AUX 2 IN”

socket 35. Connect the AUX cable to an ap-

propriate audio source.

OBJ_BUCH-1181-001.book Page 23 Monday, March 1, 2010 12:07 PM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Bosch GML 20 Professional Operations Instructions Page 10

Comments to this Manuals

Related products and manuals for Multifunctionals Bosch GML 20 Professional