Bosch Plena Voice Alarm System Service Manual download pdf (Page 56)

Bosch Security Systems | 2004-06 | 9922 141 10371en

Plena Voice Alarm System | Installation and User Instructions | Operation en | 56

6.6.3 Exiting the emergency state

Exit the emergency state by pressing the EMG Reset

button (see figure 6.11).

6.7 Emergency calls

Proceed as follows to distribute a live spoken emergency

call:

1 Enter the emergency state (see section 6.6.1).

2 Select one or more zones (see section 6.7.1).

3 Make the emergency call by using the EMG

microphone (see section 6.7.2).

4 Exit the emergency state (see section 6.6.3).

6.7.1 Selecting zones

Select the zones to which the call/message must be

distributed by pressing the corresponding Zone select

buttons (see figure 6.12). A red Zone select LED above a

button, indicates that the zone is selected.

•If a Zone select indicator is turned OFF, the zone is not

selected. Press the Zone select button to select the

zone.

•If a Zone select indicator is turned ON, the zone is

selected. Press the Zone select button to deselect the

zone.

To simultaneously select all zones, press the All call

button (see figure 6.13).

6.7.2 Making an emergency call

Press the PTT (Push To Talk) button (on the left side of

the EMG microphone) and speak into the microphone

(see figure 6.14). The call is only distributed to the

selected zones (see section 6.7.1). If no zones are

selected, the call is automatically distributed to all zones.

When the PTT button is pressed:

• The red EMG mic indicator on the front of the

controller is turned ON (see figure 6.15).

• If they are currently being distributed, the default

alert and alarm messages are stopped (to activate an

alert message, see section 6.8, to activate an alarm

message, see section 6.9).

figure 6.10: EMG Acknowledge button

figure 6.11: EMG reset button

Zone select

Zone1 Zone2

Fault

Reset

EMG

Ack

Zone select

Zone1 Zone2

Fault

Reset

EMG

Ack

figure 6.12: Zone select buttons

figure 6.13: All call button

Note

If no zones are selected, the call/message is

automatically distributed to all zones in the

system.

Zone select

Zone1 Zone2

Fault

Reset

EMG

Ack

Indicator test

EMG mic

All call

Alert message

Alarm message

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 71 72

Comments to this Manuals

No comments

Bosch Plena Voice Alarm System Service Manual Page 56

Comments to this Manuals

Related products and manuals for Musical Equipment Bosch Plena Voice Alarm System