Bosch D720 Installation Guide download pdf (Page 9)

10 en | Programming the Control Panel GV3 Series v8.11 or Higher

F01U170805 | 02 | 2011.10 Quick Reference Guide Bosch Security Systems, Inc.

3 Programming the Control Panel

You can program the control panel with RPS using a network connection or serial connection.

You can program some paramaters of the control panel with keypad programming.

3.1 RPS Programming over a Network Using the DX4020 Ethernet

Network Interface Module

For additional information, refer to IP Address Programming in the Conettix DX4020 Network

Interface Module Installation Guide (P/N: F01U045288).

3.2 RPS Programming over a Network Using the ITS-DX4020-G

GPRS/GSM Communicator

For additional information, refer to the Conettix ITS-DX4020-G Installation Guide (P/

N: F01U163066).

3.3 RPS Programming Using the DX4010V2 RS-232/USB Serial

Interface Module

For additional information, refer to the DX4020 RS-232/USB Serial Interface Module Installation

Instructions (P/N: F01U083036).

3.4 RPS Programming Using the Keypad Programming

For additional information, refer to the D9412GV3/D7412GV3 Program Entry Guide (P/N:

F01U170807) or the D7212GV3 Program Entry Guide (P/N: F01U170808).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

No comments

Bosch D720 Installation Guide Page 9