Bosch 1617EVSPK Specifications download pdf (Page 4)

Never use dull or damaged bits. Sharp bits

must be handled with care. Damaged bits can

snap during use. Dull bits require more force to

push the tool, possibly causing the bit to break.

Never touch the bit during or immediately

after the use. After use the bit is too hot to be

touched by bare hands.

Never lay the tool down until the motor has

come to a complete standstill. The spinning

bit can grab the surface and pull the tool out of

your control.

Never use bits that have a cutting diameter

greater than the opening in the base.

Some dust created by power

sanding, sawing, grinding,

drilling, and other construction activities

contains chemicals known to cause cancer,

birth defects or other reproductive harm.

Some examples of these chemicals are:

• Lead from lead-based paints,

• Crystalline silica from bricks and cement and

other masonry products, and

• Arsenic and chromium from chemically-

treated lumber.

Your risk from these exposures varies,

depending on how often you do this type of

work. To reduce your exposure to these

chemicals: work in a well ventilated area, and

work with approved safety equipment, such as

those dust masks that are specially designed to

filter out microscopic particles.

-4-

!

WARNING

BM 2610908996 5/03 5/20/03 9:06 AM Page 4

1 2 3 4 5 6 7 8 9 ... 67 68

Comments to this Manuals

No comments