Bosch GST 85 PE Operations Instructions download pdf (Page 17)

English | 17

Bosch Power Tools 1 609 929 N90 | (8.4.08)

f Never use the machine with a damaged ca-

ble. Do not touch the damaged cable and pull

the mains plug when the cable is damaged

while working. Damaged cables increase the

risk of an electric shock.

Functional Description

Read all safety warnings and all in-

structions. Failure to follow the

warnings and instructions may result

in electric shock, fire and/or serious

injury.

While reading the operating instructions, unfold the

graphics page for the machine and leave it open.

Intended Use

The machine is intended for making separating

cuts and cut-outs in wood, plastic, metal, ceram-

ic plates and rubber while resting firmly on the

workpiece. It is suitable for straight and curved

cuts with mitre angles to 45°. The saw blade rec-

ommendations are to be observed.

Product Features

The numbering of the product features refers to

the illustration of the machine on the graphics

page.

1 Rotatable top handle with pushbutton

2 Thumbwheel for stroke rate preselection

(GST 85 PE)

3 Allen key

4 On/Off switch

5 Switch for sawdust blowing device

6 Adjusting lever for orbital action

7 Base plate

8 Guide roller

9 Saw blade*

10 Contact protector

11 Stroke rod

12 Splinter guard*

13 Scale for mitre angle

14 Screw

15 Angle gauge**

16 Bolt hole

17 Positioning pin/mark

18 Lead for the parallel guide

19 Locking screw for parallel guide*

20 Parallel guide with circle cutter*

21 Centring tip of the parallel guide*

*The accessories illustrated or described are not in-

cluded as standard delivery.

**Commercially available (not included in the delivery

scope)

Noise/Vibration Information

Measured values determined according to

EN 60745.

Typically the A-weighted noise levels of the prod-

uct are: Sound pressure level 83 dB(A); Sound

power level 94 dB(A). Uncertainty K =3 dB.

Wear hearing protection!

Vibration total values (triax vector sum) deter-

mined according to EN 60745:

Cutting wood: Vibration emission value

=5.5 m/s

, uncertainty K=1.5 m/s

Cutting sheet metal: Vibration emission value

=5.8 m/s

, uncertainty K=1.5 m/s

The vibration emission level given in this informa-

tion sheet has been measured in accordance

with a standardised test given in EN 60745 and

may be used to compare one tool with another. It

may be used for a preliminary assessment of ex-

posure.

The declared vibration emission level represents

the main applications of the tool. However if the

tool is used for different applications, with differ-

ent accessories or poorly maintained, the vibra-

tion emission may differ. This may significantly

increase the exposure level over the total work-

ing period.

An estimation of the level of exposure to vibra-

tion should also take into account the times

when the tool is switched off or when it is run-

ning but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total

working period.

Identify additional safety measures to protect the

operator from the effects of vibration such as:

maintain the tool and the accessories, keep the

hands warm, organisation of work patterns.

OBJ_BUCH-431-002.book Page 17 Tuesday, April 8, 2008 11:09 AM

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 118 119

Comments to this Manuals

No comments

Bosch GST 85 PE Operations Instructions Page 17

Comments to this Manuals

Related products and manuals for Power tools Bosch GST 85 PE