Bosch PHO 20-82 Specifications download pdf (Page 7)

English | 13

Bosch Power Tools 2 609 932 743 | (7.9.12)

Technical Data

Noise/Vibration Information

Measured sound values determined according to EN 60745.

Typically the A-weighted noise levels of the product are:

Sound pressure level 86 dB(A); Sound power level 97 dB(A).

Uncertainty K =3 dB.

Wear hearing protection!

Vibration total values a

(triax vector sum) and uncertainty K

determined according to EN 60745:

=3m/s

, K=1.5 m/s

The vibration emission level given in this information sheet

has been measured in accordance with a standardised test

given in EN 60745 and may be used to compare one tool with

another. It may be used for a preliminary assessment of expo-

sure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different

applications, with different accessories or poorly maintained,

the vibration emission may differ. This may significantly in-

crease the exposure level over the total working period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working pe-

riod.

Identify additional safety measures to protect the operator

from the effects of vibration such as: maintain the tool and the

accessories, keep hands warm, organise work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product de-

scribed under “Technical Data” is in conformity with the fol-

lowing standards or standardization documents: EN 60745

according to the provisions of the directives 2011/65/EU,

2004/108/EC, 2006/42/EC.

Technical file (2006/42/EC) at:

Robert Bosch GmbH, PT/ETM9,

D-70745 Leinfelden-Echterdingen

Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

16.08.2012

Assembly

f Before any work on the machine itself, pull the mains

plug.

Changing the Tool

f Be cautious when replacing the planer blades. Do not

grasp the planer blades by the cutting edges. Possible

danger of injury due to the sharp cutting edges of the plan-

er blades.

Use only original Bosch carbide blades (TC).

The carbide blade (TC) has 2 cutting edges and can be reversed.

When both cutting edges are dull, the planer blade 13 must be re-

placed. The carbide blade (TC) may not be resharpened.

Disassembling the Planer Blade(s) (see figure A)

To reverse or replace the planer blade 13, rotate the blade

drum 10 until it is parallel to the planer base plate 8.

n Loosen the two fastening screws 12 with the Allen key

14 by approx. 1 – 2 turns.

o If necessary, loosen the clamping element 11 by giving it

a light blow with a suitable tool (e.g. a wooden wedge).

p Push the planer blade 13 sidewards out of the blade

drum 10 with a piece of wood.

Assembling the Planer Blade(s) (see figure B)

The guide groove of the planer blade always ensures continu-

ous height adjustment when replacing or reversing it.

If required, clean the blade seat in the clamping element 11

and the planer blade 13.

When assembling the planer blade, ensure that it is seated

properly in the blade holder of the clamping element 11 and

aligned flush at the side edge of the rear planer base plate 8.

Afterwards tighten the 2 fastening screws 12 again with the

Allen key 14.

Note: Before restarting, check if the fastening screws 12 are

tightened well. Rotate the blade drum 10 by hand and ensure

that the planer blade does not graze.

Dust/Chip Extraction

f Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health. Touching or breathing-in the dusts can cause

allergic reactions and/or lead to respiratory infections of

the user or bystanders.

Certain dusts, such as oak or beech dust, are considered

as carcinogenic, especially in connection with wood-treat-

ment additives (chromate, wood preservative). Materials

containing asbestos may only be worked by specialists.

Planer PHO 20-82

Article number

0 603 365 1..

Rated power input

W680

Output power

W320

No-load speed

min

-1

19500

Planing depth

mm 0 – 2

Rebating depth

mm 0 – 8

Planing width, max.

mm 82

Weight according to

EPTA-Procedure 01/2003 kg 2.2

Protection class

/II

The values given are valid for a nominal voltage [U] of 230 V. For differ-

ent voltages and models for specific countries, these values can vary.

Dr. Egbert Schneider

Senior Vice President

Engineering

Helmut Heinzelmann

Head of Product Certification

PT/ETM9

OBJ_BUCH-631-004.book Page 13 Friday, September 7, 2012 12:39 PM

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Bosch PHO 20-82 Specifications Page 7

Comments to this Manuals

Related products and manuals for Power tools Bosch PHO 20-82