Bosch CC880/LP880, SC8016 Specifications download pdf (Page 20)

CC880/LP880, SC8016 | Quick Reference Guide | 5. Programming Parameters EN | 20

Bosch Security Systems | 6/04 | 4998152461B

5.17 Siren Programming

5.17.1 Siren Run Time (V1.10 to V2.03, V2.04+)

Location

660 (V1.10 to V2.03)

Default

0 No siren time

1 to 15 Siren time in minutes

Location

660 (V2.04+)

Default

0 No siren time

1 to 15 Siren time in minutes

5.17.2 Siren Sound Rate

Location

661

Default

0 Slowest frequency

15 Fastest frequency

5.17.3 Swinger Shutdown Count for Siren and

Dialler (V1.10 to V1.37, V1.40)

Location

662 (V1.10 to V1.37)

Default

0 No lockout

1 to 15 Number of times siren/dialler operate until

lockout

Location

662 (V1.40)

Default

0 No lockout

1 to 15 Number of times siren operate until lockout

5.18 Dialler Options Programming

5.18.1 Dialler Options 1

Location

663

1 Dialler reporting functions allowed (disabled in

V2.00, also disable Safecom)

2 Remote arming via telephone allowed

4 Upload/download via alarm link allowed

8 Terminate alarm link session on alarm

5.18.2 Dialler Options 2

Location

664

Default

1 Open/close reports only after alarm

2 First to open/last to close reporting (partitioned

systems only)

4 Open/Close Reports in STAY Mode allowed

8 Answering machine bypass only when armed

(V1.31+)

5.19 System Options Programming

5.19.1 System Options 1

Location

665

1 Forced arming allowed

2 Smart lockout allowed

4 Horn speaker monitor

8 Horn speaker beeps allowed

5.19.2 System Options 2

Location

666

1 Keyswitch interface, night arm station, or RE005

installed

2 Handover delay to be sequential

4 Codepad panic to be silent

8 Access denied (code retries/codepad tamper) to be

silent

5.19.3 System Options 3

Location

667

Default

1 Area 1 codepad connected to main data terminal

2 Modem module required for alarm link operation

4 AC fail after 1 hour (Disabled = after 2 minutes)

8 Pulse count handover allowed

5.19.4 System Options 4 (V1.10 only)

Location

668

Default

1 Delay audible alarm until communication complete

2 Reset alarm outputs from any area (partitioned

systems only)

4 Auto arm in AWAY mode

8 Auto arm in STAY mode 1

5.19.5 System Options 4 (V1.20+)

Location

668

Default

1 Delay audible alarm until communication complete

2 Reset alarm outputs from any area (partitioned

systems only)

4 Ignore AC mains fail (V1.30+)

8 Auto arm in STAY Mode 1

5.19.6 System Options 5 (V1.37+)

Location

897

Default

1 Send Test Report at end of siren time

2 Power up in disarmed state (re-boot)

4 Internal crystal to keep time (V1.40+)

8 Reserved

5.19.7 System Options 6 (V1.33+)

Location

898

1 Busy tone detection for domestic dialling allowed

2 Kiss-off detection for domestic dialling allowed

4 Extend acknowledge time from 30 seconds to

60 seconds

8 If battery failed, restrict battery test only on arming

(V1.35+)

1 ... 19 20 21 ... 32

Comments to this Manuals

No comments

Bosch CC880/LP880, SC8016 Specifications Page 20

Comments to this Manuals

Related products and manuals for Security access control systems Bosch CC880/LP880, SC8016