Bosch DSDA ISCSI DISK ARRAY SERIES DSA-N2B20 Installation Guide download pdf (Page 11)

DSDA iSCSI Disk Array Series Configuration through the Web Interface | en 9

Bosch Security Systems Installation Guide V 1 | 2008.08

2. Select from the Control Panel of your computer Network Connections, Properties.

Here, configure your network interface to use IP address 10.10.10.9 with Subnet mask

255.0.0.0.

Example screen:

3. Connect your computer directly to the network port labeled e0a on the storage system,

using a crossover cable.

Alternatively, connect your computer to the network the storage system is connected to.

4. Open a Web browser and enter http://10.10.10.10/na_admin.

You will be asked to log in.

NOTICE!

The IP address 10.10.10.9 is an example. The IP addresses 10.10.10.10 and 10.10.10.11 are

the default IP addresses for the storage system and cannot be used otherwise.

1 ... 10 11 12 ... 40

No comments

Bosch DSDA ISCSI DISK ARRAY SERIES DSA-N2B20 Installation Guide Page 11