Bosch REG Sentry Access Control Instruction Manual download pdf (Page 12)

INST-164 Revision 4

Page 12 of 18

Select “Internet Protocol (TCP/IP)” and then click on the “Properties” button.

Figure 13: Internet Protocol (TCP/IP) Properties

Select the “Use the following IP address” option and then enter the following IP address, 192.168.0.200. Enter

the subnet mask as 255.255.255.0

N.B. Make a note of any current settings before changing the network settings.

Once the pc network settings have been change you will be able to access the Reg-Sentry by typing

192.168.0.204 into your web browser.

Figure 14: Reg-Sentry Web Service Logon Page

The login password will be the last 4 characters of the Reg-Sentry MAC address. Using the web service

provided will enable you to alter the Reg-Sentry’s IP address to a suitable value for your system. Once this is

done you should revert to your old network settings.

Once you have logged on select the systems information page

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Bosch REG Sentry Access Control Instruction Manual Page 12