Bosch AutoDome 600 Series User Manual

AutoDome 600 Series Analog PTZ CameraVG5 600 Series en User Manual

Setup Menu Choices:Menu DescriptionExit Exits the menu.Camera Setup Accesses adjustable camera settings such as: white balance, gain,sharpness, sync,

Camera Setup* Shutter Mode: Auto SensUP * Shutter: 1/60 * Auto SensUP Max: 15x * Night Mode: AUTO * Night Mode Color: OFF * Night Mode T

Menu Description Sub-menu / Description DefaultSettingMax. Gain Level Adjusts the maximum gain level thatthe gain control adjusts to when setto AUTO.S

Lens SetupThe Lens Setup Menu provides access to lens settings that can be changed or customized.Menu items marked with an asterisk (*) are the defaul

Menu Description Sub-menu / Description DefaultSettingIris Speed Adjusts the manual iris speed. Sliding scale:– (1 to 10) +5Max. Zoom Speed Adjusts th

Menu Description Sub-menu / Description DefaultSettingTour 1 Period Changes dwell time betweenpresets during the tour.Sliding scale:– (3 sec. to 10 mi

Display Setup Exit... * Title OSD: MOMENTARY * Camera OSD: ON Display Adjust: Sector Blanking... Privacy Masking...

Menu Description Sub-menu / Description DefaultSettingAzimuth Displays azimuth/elevationvalues.On: Displays azimuth/elevation readings.Off: Hides azim

Communication Setup* Bilinx: ON Restore Defaults... * = Factory Setting Focus / Iris: Sele

Alarm I/O Setup Inputs Setup Outputs Setup...PhysicalInput 1-7 2. Alarm Input 2 N.O.S. Rule Setup... 3. Alarm In

Notice!Alarm inputs 1 and 2 provide tamper detection, if programmed as supervised, for breaks orshorts in an alarm circuit. See the VG5 AutoDome Insta

Menu Description Sub-menu / Description Default SettingAlarm Relay A fixed output availablefor use in a rule. Outputs 5-12 Defines a commandoutput f

Rule Setup... Rule 1 Right / Left: Select Period Time Focus / Iris: Select Focus / Iris: Select Type Rule Setup Menu ChoicesMe

Notice!You can include up to four (4) Input and Output events in a single rule. Each input andoutput, however, must be true for the alarm's rule

Advanced Feature Setup* AutoTrack Sensitivity Auto AutoTrack TImeout OFF AutoTrack TImeout Period 5 min * Camera Height: 12 Virtual

Diagnostics Exit... Alarm Status... BIST... Internal Temp: Deg F / Deg C High Temp Events: Deg F / Deg C Highest Temp Deg F / Deg

Menu Description Sub-menu / DescriptionBIST Enters the Perform Built-in Self Tests menu. Ifconfirmed, the BIST tests start and the resultsare displaye

Alarm Status Exit... Alarm Input 1 HighAlarm Input 2 HighAlarm Input 3 OpenAlarm Input 4 OpenAlarm Input 5 OpenAlarm Input 6 OpenAlarm Input 7 O

Common AutoDome User Commands (unlocked)This chapter details the commonly used Bosch keyboard setup commands. SeeSection 6 Keyboard Commands by Number

– Move the joystick left or right until the cursor is below the title character you need toclear.– Press Focus/Iris to clear the character.– Move the

Table of contents1Getting Started 51.1 Powering On 51.2 Establishing AutoDome Control 61.2.1 AutoDome 600 Interface Methods 61.2.2 Basic Keyboard Oper

– Return to Scene 1: Returns the camera position back to the first scene saved inmemory.– Recall Previous Aux: Returns the camera to the previous oper

Alternative Control ProtocolsThe VG5 AutoDome supports three alternative control protocols that allow a user to sendcommands and to receive informatio

Setup MenuCamera Setup PTZ Setup Edit Password *FastAddress: Not Set Software Version Ack and Reset Alarms Restore All Settings

Enter FastAddress 200668 r Continue... Exit... Joystick: Match Identifier Notice!If the user doe

FastAddress FastAddress: Not Set Save “##” as FastAddress Clear Current FastAddress Exit Without Change

Setup Menu* = Factory SettingFocus / Iris: SelectUsing a Pelco ControllerThis section provides instructions to set a FastAddress with a Pelco key

Hardware ConfigurationThe AutoDome is configured from the factory for RS-485 operation in Pelco Protocol Mode.1. Connect the controller's TX term

Keyboard Command User Action DescriptionPress and hold Initiate Recording B. Press ACK to end recording.3-Pattern Press Initiate the AutoDome standard

Notice!Some Pelco controllers do not support all the preset command numbers. Consult the specificPelco controller's documentation for supported p

Pelco On-Screen MenusYou can program the AutoDome through the Pelco on-screen display (OSD) menus. To accessthe Pelco menus, you must configure the Au

6Keyboard Commands by Number 457Advanced Features 497.1 Alarm Rules 497.1.1 Controlling Alarm Rules 497.1.2 Alarm Rule Examples 497.2 AutoTrack Operat

Menu DescriptionExit Exits the menu.Command Lock(locked)Allows or prohibits accessing locked commands. (If password isset, you are prompted to enter t

Pelco menu Bosch menu Setup Menu Setup Menu Bosch Menu Camera Setup Camera Setup Lens Setup PTZ Setup

Camera Setup * = Factory Setting Focus / Iris: SelectCamera Setup Menu Choices:Menu Description Sub-menu / Description DefaultSettingExit E

PTZ Setup Menu Choices:Menu Description Sub-menu / Description DefaultSettingExit Exits the menu.� Edit Tour 1 Accesses the Add /Remove Scenes OnSt

Menu Description DefaultSettingRestore All Settings(locked)Restores all settings to their original factory defaultsettings. Reset All Memory(locked)Re

Keyboard Commands by NumberLockedFunctionKeyCommNo.Command Description On/Off 1 Scan 360° Auto Pan without limits On/Off 2 Auto Pan Auto Pan between

LockedFunctionKeyCommNo.Command Description* On/Off 58 Day/Night Threshold On–menu (Day/Night only) On/Off 59 Night Mode Priority Motion–Activates Ni

LockedFunctionKeyCommNo.Command Description On/Off 89 Preposition Confirmation On–Isues a message that prompts for approvalto overwrite a preposition

LockedFunctionKeyCommNo.Command Description On/Off 680 Homing Recalibration Display Displays the current mode of operation,intervals, time until the

Advanced FeaturesThis chapter details the advanced features of the VG5 AutoDome Camera.Alarm RulesThe AutoDome features a powerful alarm rule engine.

Getting StartedInstall and wire the AutoDome according to the VG5 AutoDome Installation Manual. A typicalsystem includes a keyboard, matrix switcher,

6. Set up the Alarm Rule (for this example use Rule 1). Select the Inputs from the RuleSetup menu:7.– Select Rule 1.– Set the first input to Alarm Inp

9. Select the alarm Outputs:10.– Set the first output to OSD.– Set the second output to Shot 5 viewing the fence.– Set the third output to AutoTrack a

5. Type the number 1 or use the slide bar to specify shot number 1. (Shot numbers must beset prior to configuring an alarm rule. See Setting Preset Sh

Figure 7.4: Alarm Rule 1 Configuration1. Move the Output slider bar to Output 2.2. Select Tracking from the Output Option drop-down list.This option i

– AutoDome activates AutoTrack after a period of Inactivity (Return to Scene 1 orReturn to Previous Aux), if AutoTrack is programmed for these activit

– Check the virtual mask periodically to ensure that it still covers the entire object tobe masked. Adjust the mask if necessary.AutoTrack Optimizatio

Notice!Draw the mask 10% larger than the object to ensure that the mask completely covers theobject as the AutoDome zooms in and out.Privacy MaskingPr

Notice!Up to five (5) anchor points can be used to form the area which you want to detect motionwithin. Motion Detection is not activated until the Pr

Azimuth Range Compass Direction246° to 290° W (West)291° to 335° NW (Northwest)336° to 20° N (North)Setting the Azimuth Zero PointThe installer must c

Displaying Azimuth, Elevation, and Compass HeadingsYou can display only the azimuth/elevation readings or only the compass reading, or you candisplay

Establishing AutoDome ControlAutoDome 600 Interface MethodsThe most common ways to interface with the AutoDome are:– Using a keyboard and on-screen di

Function KeyCommandNumberCommand DescriptionOn/Off 683 Recalibration Interval Changes the homing recalibration interval.Intervals are in 6-hour increm

Setting ValuesStatus EnabledDisabledMode LossLoss + IntervalInterval 6 - 72 hours, in 6-hour incrementsInitial Offset 4 - 20 hours, in 4-hour incremen

Troubleshooting GuideVG5 AutoDome Operation and ControlProblem SolutionNo video – Check that the Green LED on the AutoDome CPU board is on. This LED i

Problem SolutionNo Audio – Check the computer receiving the audio from the VG5 AutoDome or from the IPEncoder.– Check the computer’s audio settings. E

Problem Solution If O.K., then:– Check all network connections.– If the video is clear and contains no distortion, then the network connections arepr

VG5 600 Series AutoDome AudioThe following diagram illustrates the path for audio transmissions between a microphone/AutoDome and a computer that play

Appendix: FastAddress ConversionsSample: If there is video coming from Camera #131, look at the appropriate conversion tablebelow to convert the FastA

Bosch Security Systems, Inc.850 Greenfield RoadLancaster, PA, 17601USAwww.boschsecurity.com© Bosch Security Systems, Inc., 2014Bosch Sicherheitssyst

Notice!The convention used for control key commands in this manual is ON, OFF, SET, and SHOT.Refer to your keyboard manual for the key naming conventi

4. Follow the on screen instructions. You receive an on-screen confirmation when theFastAddress is complete.Notice!FastAddress is stored in nonvolatil

On-Screen Display Menu NavigationThe AutoDome is programmed through the on-screen display (OSD) menus. To access theOSD menus, you must open the main