Bosch REG-D1 User Manual download pdf (Page 16)

- 10 -

4. COLOR OVERVIEW CAMERA LENS

SETTING

The following steps show the installer how to

access the camera board and the camera lens.

Step 4.1 - Remove sunshield by loosening top

bolt with a standard Philips

screwdriver.

Step 4.2 - Disconnect the power source to the

camera and the video signal at the

BNC connector.

Step 4.3 - Remove the four cap screws with a

3mm Allen key. See Figure 4-1 on

page 11.

Step 4.4 - Carefully slide out the rear housing

from the main enclosure. Make sure

the gasket remains with the rear

section.

See Figure 4-2 on page 12.

Step 4.6 - Carefully slide the rear section into

the main enclosure and tighten the

cap screws.

1 ... 15 16 17 ... 28

Comments to this Manuals

No comments