Bosch NurseCall Main Unit User Manual download pdf (Page 22)

22 en | NurseCall functions description NurseCall

970.000 | v1.2 | 2008.09 General Overview Bosch Security Systems

5.2 "Room" Call for Help

Fig. 5.2 Call for Help with Multifunction Wall Transmitter N46

By pressing the Red button of the N46 Multifunction Wall Transmitter or the Pear push button,

the patient activates a Call for help.

The care personnal is informed by the NurseCall through the Main Unit (or Relay Unit) and

connected devices:

– The Red button and the LED Indicator are blinking;

– Alarm/Event data is displayed;

– For example, a red light can be connected to the Main Unit (or Relay Unit) internal

contact and placed in the corridor;

– The Alarm is stored in the buffer.

The Acknowledgement can be done with the Green button on the N46, on the Main Unit or on

the Relay Unit.

By pressing again the Green button on the N46, the care person shows he/she is leaving the

room.

By presssing the Blue button, the care person can request assistance.

X For more information on N46, see its specific document.

NOTICE!

For example, two signal lights can be placed in the corridor to indicate alarm statutes:

Green light:

– OFF: no alarm;

– ON: care personnal is in the room.

Red light:

– OFF: no alarm;

– ON: Calling for help;

– Blinking: Calling for assistance.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

No comments

Bosch NurseCall Main Unit User Manual Page 22