Bosch DT10RF Instruction Manual download pdf (Page 9)

To change temperature for a short period (Override):

1. Press + or - buttons to adjust set temperature.

Set temperature flashing as shown.

2. After 5 seconds the Digistat will start controlling at selected

set point but displays actual room temperature.

Two chevrons indicates override mode.

3. To exit override press > once or wait until next change in

the pre-set program (i.e. when period 5, in this case,

becomes period 6).

To set a constant room temperature

(Manual mode):

1. Press < once, the display shows temperature flashing

(e.g. 20°C).

2. Press + or - buttons to adjust the temperature as required.

The temperature will stop flashing after 5 seconds and start

controlling at this temperature.

3. Press > once, to return to auto mode.

Digistat Optimising Programmer -

7-Day operation:

1. With the product operating as normal in Auto mode press

> once.

2. Press + button until the display is flashing as shown.

2 chevrons indicate override mode

Reverts to 1

chevron

PROGRAMMABLE SETTINGS

ADJUSTING TIMES & TEMPERATURES

DT10RF OPTIMISING PROGRAMMER

INSTRUCTION MANUAL

8 716 115 494a (02.2009)

OPERATING & INSTALLATION

INSTRUCTIONS

DT10RF OPTIMISING PROGRAMMER

INSTRUCTION MANUAL

8 716 115 494a (02.2009)

OPERATING & INSTALLATION

INSTRUCTIONS

8_716_115_494a 9/2/09 09:49 Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

No comments

Bosch DT10RF Instruction Manual Page 9